Announcement

Collapse
No announcement yet.

Benq power board failed, no backlight

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Benq power board failed, no backlight

    I have a HP LCD monitor with benq power board. Last week, when i turned it on, the backlight turned off right away. I can see the image moving on the screen using flashlight.

    I found out the whole thing was made by benq and there 're some discoloration( lititle darker) near the transfomer .

    I borrowed a ESR meter from my friend and all the caps are still within range. I suspect it is the transisitor that near the transformer.

    The transistor is FU9024N , a p-channel transistor, and i only have a multimeter

    Anyone know how to to test it using the multimeter?

    #2
    Re: Benq power board failed, no backlight

    Well you can find a few transistor test methods out there. i always skip them because my multimeter has a nice little feature where you slot the transistor in a socket and switch it to "Transistor test" mode. look around and you should fine one.

    Stats Reset Every Month.
    My Forums

    Comment

    Working...
    X