Samsung TV with black screen

[gua45]

Hello, good morning, I have a Samsung TV,
Model: UE32F5700AW, when I turn it on
it has sound and the led of the panel light up but the image
is absent, I have been told that it may be the
T-con. In the input and output of the fuse of this card I have
12 v., But I do not know where to measure more tensions in the T-con.
The code of the T-con is RUNTK 5351TP 0055FV ZZ.
Please can someone tell me the steps to follow for
find the problem
Greetings and thank you.
P.S. Sorry for my English.

[budm]

Re: Samsung TV with black screen

Please upload good clear straight shot pictures of the whole T-CON board and also the whole back side of the TV showing all the boards.

[gua45]

Re: Samsung TV with black screen

Hi, I'm attaching TV pictures, I hope
be correct
Greetings and thank you

[Andrew F. Ali]

Re: Samsung TV with black screen

Looks like F100 was bridged and was open circuited again. If you do have 12V on both sides of F100 then measure the voltages on VGL, VGH, HVDD and VCOM and report your findings.

[gua45]

Re: Samsung TV with black screen

Hello, indeed the fuse is bypassed because it was fused and as I said in my first post
I have 12.4 v. At the entrance and exit and in the points you mention I have no tension.
A greeting.

[gua45]

Re: Samsung TV with black screen

On the TV I have sound and backlighting
but I do not have an image

[Andrew F. Ali]

Re: Samsung TV with black screen

If the Flat ribbon cable to the Panel Bd. is disconnected, do these voltages come up? If yes then the Panel is defective, if no then a new T-CON Bd. should solve your problem.

[nomoresonys]

Re: Samsung TV with black screen

Mainboard there, need to check white sticker numbers to see if its a match, 60 euros for a 32 inch tv seems a bit high tho. https://www.ebay.es/itm/PLACA-PRINCI...13WS:rk:3:pf:0 Oops, thought you were looking for a mainboard.

[gua45]

Re: Samsung TV with black screen

Disconnecting the flat cable that goes to the
Main-boar, the voltages remain the same, absent.
I understand that it is necessary to change the T-con, I can replace it
for a Runtk 5246TP instead of the Runtk 5351TP.
A greeting.

[gua45]

Re: Samsung TV with black screen

I read on the network that the Runtk 5246TP card gives less
problems that the Runtk 5351TP.

[Andrew F. Ali]

Re: Samsung TV with black screen

Yes a new T-CON will fix your problem.

[gua45]

Re: Samsung TV with black screen

Thanks, I'm going to order the T-con, runtk 5264TP and when the
receive information about the results.
A greeting.

[Davi.p]

Re: Samsung TV with black screen

OH MY GOD!... Knowledge zero...

[budm]

Re: Samsung TV with black screen

Disconnecting the flat cable that goes to the
Main-boar, the voltages remain the same, absent.
I understand that it is necessary to change the T-con, I can replace it
for a Runtk 5246TP instead of the Runtk 5351TP.
A greeting.

What we need are the Voltages of VGH, VGL, etc. on the T-CON board test point when the ribbon able between the T-CON and the LCD panel are not connected and connected, not the cables to the Main board. There are many Voltage test points on the T-CON board that need to checked and reported.

[vlado66]

Re: Samsung TV with black screen

voltages

[budm]

Re: Samsung TV with black screen

What we need is the OP (gua45) to provide the Voltages from HIS T-CON board suggested in my post #14.

[Davi.p]

Re: Samsung TV with black screen

But we know fuse is blown so he must replace it first.. also to be tested VLS15.6V

[petehall347]

Re: Samsung TV with black screen

ic looks bad by where it says FET 201 top left

[nomoresonys]

Re: Samsung TV with black screen

Hello, good morning, I have a Samsung TV,
Model: UE32F5700AW, when I turn it on
it has sound and the led of the panel light up but the image
is absent, I have been told that it may be the
""T-con. In the input and output of the fuse of this card I have
12 v."", But I do not know where to measure more tensions in the T-con.
The code of the T-con is RUNTK 5351TP 0055FV ZZ.
Please can someone tell me the steps to follow for
find the problem
Greetings and thank you.
P.S. Sorry for my English.

Tcon fuse is good then.

[budm]

Re: Samsung TV with black screen

But we know fuse is blown so he must replace it first.. also to be tested VLS15.6V

He bypassed the fuse per post #5.