Badcaps.net Forum
Go Back   Badcaps Forums > Motherboards with Bad Capacitors > Abit - Asus - Aopen
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 09-25-2016, 09:57 PM   #81
bianchi77
Badcaps Veteran
 
Join Date: Jun 2016
City & State: Western Australia
My Country: Australia
Line Voltage: 220AC
I'm a: Knowledge Seeker
Posts: 1,044
Default Re: P5PE-VM question ?

anyone knows ? or have the schematic of this board ?
I can't find the datasheet for the chip and the schematic of this board....a challange for fixing it ...
bianchi77 is online now   Reply With Quote
Old 09-26-2016, 02:25 AM   #82
bianchi77
Badcaps Veteran
 
Join Date: Jun 2016
City & State: Western Australia
My Country: Australia
Line Voltage: 220AC
I'm a: Knowledge Seeker
Posts: 1,044
Default Re: P5PE-VM question ?

my northbridge temperature is reaching to 70 degree celcius on heatsink, is it the main problem ?
chip = intel SL99Y
bianchi77 is online now   Reply With Quote
Old 09-30-2016, 04:38 PM   #83
momaka
Badcaps Veteran
 
momaka's Avatar
 
Join Date: May 2008
City & State: VA (NoVA)
My Country: U.S.A.
Line Voltage: 120 VAC, 60 Hz
I'm a: Hobbyist Tech
Posts: 9,056
Default Re: P5PE-VM question ?

Quote:
Originally Posted by bianchi77 View Post
my northbridge temperature is reaching to 70 degree celcius on heatsink, is it the main problem ?
chip = intel SL99Y
Yes, 70C is way too much.
How are you measuring this temperature, though?
Just as a check to make sure you're not measuring the temperature wrong, try to touch the heatsink. Anything above 50C should feel uncomfortably hot, and 60C or more should be enough to cause a reaction for you to pull your hand away.
momaka is offline   Reply With Quote
Old 09-30-2016, 04:56 PM   #84
bianchi77
Badcaps Veteran
 
Join Date: Jun 2016
City & State: Western Australia
My Country: Australia
Line Voltage: 220AC
I'm a: Knowledge Seeker
Posts: 1,044
Default Re: P5PE-VM question ?

Quote:
Originally Posted by momaka View Post
Yes, 70C is way too much.
How are you measuring this temperature, though?
Just as a check to make sure you're not measuring the temperature wrong, try to touch the heatsink. Anything above 50C should feel uncomfortably hot, and 60C or more should be enough to cause a reaction for you to pull your hand away.
I measured it with my DMM temperature meter...
I let it run few more seconds and it was nearly 100....so I pulled out the power supply just in case this chip will burn....I bought the replacement already and see what happen next...

Anyway what's the cause of faulty northbridge ?
bianchi77 is online now   Reply With Quote
Old 09-30-2016, 06:06 PM   #85
bianchi77
Badcaps Veteran
 
Join Date: Jun 2016
City & State: Western Australia
My Country: Australia
Line Voltage: 220AC
I'm a: Knowledge Seeker
Posts: 1,044
Default Re: P5PE-VM question ?

Does anyone have the schematic of this Asus P5PE-VM ? cheers
bianchi77 is online now   Reply With Quote
Old 09-30-2016, 08:24 PM   #86
bianchi77
Badcaps Veteran
 
Join Date: Jun 2016
City & State: Western Australia
My Country: Australia
Line Voltage: 220AC
I'm a: Knowledge Seeker
Posts: 1,044
Default Re: P5PE-VM question ?

Quote:
Originally Posted by diif View Post
Post #25. The same way you tested that crystal.
I test mine with one of these. http://www.aliexpress.com/item/DIY-K...413364646.html
I bought that frequency counter but I can't measure 32KHz crystal..it's showing 0 always....I tried with 20MHz and 4MHz crystal it works....what should I change ? thanks
bianchi77 is online now   Reply With Quote
Old 10-18-2016, 12:51 AM   #87
bianchi77
Badcaps Veteran
 
Join Date: Jun 2016
City & State: Western Australia
My Country: Australia
Line Voltage: 220AC
I'm a: Knowledge Seeker
Posts: 1,044
Default Re: P5PE-VM question ?

Is it possible that my northbridge faulty ? It's integrated with VGA
bianchi77 is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 03:03 AM.
Did you find this forum helpful?