Re: Ratdude's Main rig V2
And she died again, same symptoms. Crash, reboot, RAID array failed. AFAIK the BBU is OK.
I've tried the following:
-Re-recapped the PSU
-Memtest86 passed (so not a RAM issue?)
-Swapped BBU batteries (Or at least I think I did)
-Swapped RAID Cards and BBU controllers
-Swapped HDDs and SATA cables.
So why do I keep getting corrupted hard drives?
I'm wondering if changing to an LSI card would have any benefit... as I'm running out of ideas. The issue seems too low-level for the RAMdisk mod to be the cause... and back when I used to run it as a true main rig, it never did this (then again, that was on the 9500 controller, not the 9550).
And she died again, same symptoms. Crash, reboot, RAID array failed. AFAIK the BBU is OK.
I've tried the following:
-Re-recapped the PSU
-Memtest86 passed (so not a RAM issue?)
-Swapped BBU batteries (Or at least I think I did)
-Swapped RAID Cards and BBU controllers
-Swapped HDDs and SATA cables.
So why do I keep getting corrupted hard drives?
I'm wondering if changing to an LSI card would have any benefit... as I'm running out of ideas. The issue seems too low-level for the RAMdisk mod to be the cause... and back when I used to run it as a true main rig, it never did this (then again, that was on the 9500 controller, not the 9550).
Comment