Announcement

Collapse
No announcement yet.

HP G62 No Power Issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: HP G62 No Power Issue

    Anyone Own working bios file for this model. May be the bios file I use may not work.

    Comment


      #22
      Re: HP G62 No Power Issue

      Originally posted by harshana View Post
      Anyone Own working bios file for this model. May be the bios file I use may not work.
      I tried another file also. but not working.
      Im thinking to flash SIO Chip. Is there any KBC backup??

      Comment


        #23
        Re: HP G62 No Power Issue

        I desoldered IO chip and soldered the chip back after cleaning the pads. After that I was able to see the AC power light near the DC jack and also The laptop powered on but no display.

        I planed to flash old bios back but I took a rest that day. Today When I replug without doing anything I was unable to see the changing light. Not only that. I see the IO chip is heating up. Whats wrong? Bad IO chip I guess. I can't find same IO chip within My county. Can I use something similar???


        Model No: KB3926QF D2

        If I ordered the same chip. Do I need to program It??? Help please

        Comment


          #24
          Re: HP G62 No Power Issue

          This chip is not programmable. It uses a separate EEprom chip for bios program. KB3926QF D2 and KB3926QF CO are substitutes.

          Comment


            #25
            Re: HP G62 No Power Issue

            Originally posted by mcplslg123 View Post
            This chip is not programmable. It uses a separate EEprom chip for bios program. KB3926QF D2 and KB3926QF CO are substitutes.

            Here are the KBC list available here.

            https://motherboard.lk/shop/?filter_brand=ene-kbc


            Im thinking about "ENE KB3926QF A1" OR "KB926QF D2" Which are available to buy. Aren't they compatible???

            Comment


              #26
              Re: HP G62 No Power Issue

              harshen, does this G62 have an Intel or AMD GPU?
              AMD versions of these computers have been known to fail due to the defective GPU, much like the 2011 Macs.
              If it has the AMD GPU next to the processor, try reflowing it at a lower temp, being careful not to melt the CPU socket.

              Comment


                #27
                Re: HP G62 No Power Issue

                Originally posted by ACS-Repair View Post
                harshen, does this G62 have an Intel or AMD GPU?
                AMD versions of these computers have been known to fail due to the defective GPU, much like the 2011 Macs.
                If it has the AMD GPU next to the processor, try reflowing it at a lower temp, being careful not to melt the CPU socket.
                No there is No separate GPU.

                Comment


                  #28
                  Re: HP G62 No Power Issue

                  KB926QF D2 is same as KB3926QF D2. The suffix A1 is not compatible for sure.

                  Comment


                    #29
                    Re: HP G62 No Power Issue

                    Originally posted by mcplslg123 View Post
                    KB926QF D2 is same as KB3926QF D2. The suffix A1 is not compatible for sure.
                    Okay. I will order KB926QF D2 Chip and try. however, can I know how we find compatible chips? Looking at pinouts??? or any other way?

                    Comment


                      #30
                      Re: HP G62 No Power Issue

                      Originally posted by mcplslg123 View Post
                      KB926QF D2 is same as KB3926QF D2. The suffix A1 is not compatible for sure.
                      I heard KB926QF D3 also same. So I used that chip but still nothing. even I can’t see 3v at power switch. Bios flashed still same.

                      whats wrong with this


                      Edit: I noticed that some always voltages are lower than mentioned.

                      10VALW——>7.22v
                      15VALW———> 10.24v

                      Is that okay???
                      Last edited by harshana; 09-16-2022, 03:34 AM.

                      Comment


                        #31
                        Re: HP G62 No Power Issue

                        Any Luck

                        Comment


                          #32
                          Re: HP G62 No Power Issue

                          Originally posted by harshana View Post
                          I heard KB926QF D3 also same. So I used that chip but still nothing. even I can't see 3v at power switch. Bios flashed still same.

                          whats wrong with this


                          Edit: I noticed that some always voltages are lower than mentioned.

                          10VALW——>7.22v
                          15VALW———> 10.24v

                          Is that okay???
                          Your 10VALW/15VALW is ok.

                          Comment


                            #33
                            Re: HP G62 No Power Issue

                            Originally posted by mcplslg123 View Post
                            Your 10VALW/15VALW is ok.
                            What do you think about the chip I used? Will it compatible or not?

                            Comment


                              #34
                              Re: HP G62 No Power Issue

                              any luck

                              Comment


                                #35
                                Re: HP G62 No Power Issue

                                Originally posted by harshana View Post
                                What do you think about the chip I used? Will it compatible or not?
                                Yes, suffix CO/D3 are also compatible on this platform.

                                Comment


                                  #36
                                  Re: HP G62 No Power Issue

                                  Originally posted by mcplslg123 View Post
                                  Yes, suffix CO/D3 are also compatible on this platform.
                                  mm What do you suggest. Im out of ideas to fix this stuff😕

                                  Comment


                                    #37
                                    Re: HP G62 No Power Issue

                                    The HP G62 has a known fault where it won't turn on because of the AMD graphics chip. Did you notice if the CAPS-LOCK LED is flashing when you turn it on?

                                    Comment


                                      #38
                                      Re: HP G62 No Power Issue

                                      Originally posted by ACS-Repair View Post
                                      The HP G62 has a known fault where it won't turn on because of the AMD graphics chip. Did you notice if the CAPS-LOCK LED is flashing when you turn it on?
                                      The thing is this laptop doesnt have dedicated graphics. There is no AMD card.

                                      Also laptop doesnt power on.

                                      Comment

                                      Working...
                                      X