Announcement

Collapse
No announcement yet.

Which series are the low ESR ones?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Which series are the low ESR ones?

    Only concerned with the good brands
    Low ESR Cap List
    • Panasonic
      • FC
      • FK
      • FM
      • FR
      • FS
    • Nichicon
    • United Chemi-Con (UCC)
      • KYB
    • Rubycon
      • Z*
    Last edited by evilkitty; 01-04-2018, 08:55 AM. Reason: Add now known ESR Cap Series to list

    #2
    Re: Which series are the low ESR ones?

    panasonic would be FC,FK,FM,FR & FS
    rubycon, anything beggining with Z and to a lesser extent, YXF & YXG series

    i cant help with the others - i dont have the datasheets on the drive.

    go look here:
    http://www.paullinebarger.net/DS/

    Comment


      #3
      Re: Which series are the low ESR ones?

      thanks
      Just edited 1st post to make it a list
      and i forget about the 1.5hr edit limit, hopefully a mod can complete it after that time
      Last edited by evilkitty; 01-04-2018, 08:58 AM.

      Comment


        #4
        Re: Which series are the low ESR ones?

        I would also add the following

        “United Chemi-Con (UCC)
        KYB”

        KY
        KZE
        LXY

        This is what I use most of the time what is above

        I also use these as well

        FC
        FR
        FM

        PW

        I will use all of the following brands

        Panasonic (2)
        United Chemi-Con (1)

        Next are equal in how I use these two brands
        I will use these two brands when repairing Servo Drive Power Supply Board if the manufacturer has used them on the board if I can find the UF value and voltage and Size Low ESR value

        Nichicon
        Rubycon
        Last edited by sam_sam_sam; 01-06-2018, 07:56 AM.
        9 PC LCD Monitor
        6 LCD Flat Screen TV
        30 Desk Top Switching Power Supply
        10 Battery Charger Switching Power Supply for Power Tool
        6 18v Lithium Battery Power Boards for Tool Battery Packs
        1 XBox 360 Switching Power Supply and M Board
        25 Servo Drives 220/460 3 Phase
        6 De-soldering Station Switching Power Supply 1 Power Supply
        1 Dell Mother Board
        15 Computer Power Supply
        1 HP Printer Supply & Control Board * lighting finished it *


        These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

        1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
        2 Hem Saw Computer Stack Board

        All of these had CAPs POOF
        All of the mosfet that are taken out by bad caps

        Comment


          #5
          Re: Which series are the low ESR ones?

          Low ESR =/= Low Impedance

          Sometimes you want the Low Impedance...

          Comment


            #6
            Re: Which series are the low ESR ones?

            That very true
            9 PC LCD Monitor
            6 LCD Flat Screen TV
            30 Desk Top Switching Power Supply
            10 Battery Charger Switching Power Supply for Power Tool
            6 18v Lithium Battery Power Boards for Tool Battery Packs
            1 XBox 360 Switching Power Supply and M Board
            25 Servo Drives 220/460 3 Phase
            6 De-soldering Station Switching Power Supply 1 Power Supply
            1 Dell Mother Board
            15 Computer Power Supply
            1 HP Printer Supply & Control Board * lighting finished it *


            These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

            1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
            2 Hem Saw Computer Stack Board

            All of these had CAPs POOF
            All of the mosfet that are taken out by bad caps

            Comment


              #7
              Re: Which series are the low ESR ones?

              now i am confused
              https://www.badcaps.net/forum/showthread.php?t=12836
              on a side not anyone have a screencap of the board referenced in this post (picture looks to have been updated since then)

              i can understand that they are not truly equal, but they appear to be close, under what scenario does one come without the other?

              Comment


                #8
                Re: Which series are the low ESR ones?

                When I look for capacitors I look at ESR value and Low Impedance value but I would not look for lowest ESR resistance value i look for something in the middle of the values that are listed

                That is why I use these series that I listed before and I have not really had any problems with doing it this way ( switching power supply’s)

                United Chemi-Con (UCC)
                KYB”

                KY
                KZE
                LXY
                Last edited by sam_sam_sam; 01-06-2018, 11:04 AM.
                9 PC LCD Monitor
                6 LCD Flat Screen TV
                30 Desk Top Switching Power Supply
                10 Battery Charger Switching Power Supply for Power Tool
                6 18v Lithium Battery Power Boards for Tool Battery Packs
                1 XBox 360 Switching Power Supply and M Board
                25 Servo Drives 220/460 3 Phase
                6 De-soldering Station Switching Power Supply 1 Power Supply
                1 Dell Mother Board
                15 Computer Power Supply
                1 HP Printer Supply & Control Board * lighting finished it *


                These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                2 Hem Saw Computer Stack Board

                All of these had CAPs POOF
                All of the mosfet that are taken out by bad caps

                Comment


                  #9
                  Re: Which series are the low ESR ones?

                  Lower impedance is pretty much Lower ESR

                  Search for "[manufacturer] capacitor chart" in Google

                  Ex
                  Panasonic :



                  Rubycon :




                  Nichicon : http://nichicon-us.com/english/produ...ini/index.html (hit diagram search)



                  united chemi con :



                  Attached Files

                  Comment


                    #10
                    Re: Which series are the low ESR ones?

                    Thank you for posting this this will help a lot
                    Last edited by Per Hansson; 01-07-2018, 04:52 AM. Reason: Removed quote of prior post
                    9 PC LCD Monitor
                    6 LCD Flat Screen TV
                    30 Desk Top Switching Power Supply
                    10 Battery Charger Switching Power Supply for Power Tool
                    6 18v Lithium Battery Power Boards for Tool Battery Packs
                    1 XBox 360 Switching Power Supply and M Board
                    25 Servo Drives 220/460 3 Phase
                    6 De-soldering Station Switching Power Supply 1 Power Supply
                    1 Dell Mother Board
                    15 Computer Power Supply
                    1 HP Printer Supply & Control Board * lighting finished it *


                    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                    2 Hem Saw Computer Stack Board

                    All of these had CAPs POOF
                    All of the mosfet that are taken out by bad caps

                    Comment

                    Working...
                    X