Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Laptops, Portable, and Mobile Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 09-12-2017, 02:20 PM   #1
6ot4hr
Member
 
Join Date: Oct 2014
City & State: Nasice
My Country: Croatia
I'm a: Knowledge Seeker
Posts: 85
Default NP350 SUSP# signal meaning?

Hi guys, i have Samsung NP350 which had a cap shorted to GND preventing it from working. After replacing it i get standard +5V, +3.3V rails, there is +5V on FAN controller, Bios has +3.3, chipset chip gets warm, front LED's work, power LED turns on when pwrbtn is pressed, LVDS connector has 5V and 19V(LCD_INV), but fan doesn't spin and there is no image on lcd screen.

KB9012QF (ENE) gets:

on/off button signal (3.3V)
reset stays high (3.3V) all the time
pbtn_out gets high (3.3V) after on/off_btn is pressed
sys_on gets high (3.3V) when on/off_btn is pressed
PM_SLP_S3# gets high (3.3V)
PM_SLP_S5# gets high (3.3V)
SUSPEND# gets high (3.3V)

Can anyone tell what those SUSPEND#, PM_SLP_S3#, PM_SLP_S5# are and what are they meant to do?

Is it normal to have SUSPEND# on when system starts?

Note: Laptop sometimes turns on by itself, without pushing on/off button... hm...

Last edited by 6ot4hr; 09-12-2017 at 02:32 PM..
6ot4hr is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 11:35 AM.
Did you find this forum helpful?