Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Laptops, Portable, and Mobile Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 12-01-2017, 12:03 PM   #1
6ot4hr
Member
 
Join Date: Oct 2014
City & State: Nasice
My Country: Croatia
I'm a: Knowledge Seeker
Posts: 85
Default Samsung RV509 black screen, wont boot always

Hi guys, I have a problem with friends laptop, board is BA41-01433B with i3 processor. Firstly the DC jack was getting hot (bad solder joint), now the laptop doesn't show picture every time it's turned on...
Anyhow, when it boots all voltages are ok, 19V, 3.3V etc, but when it fail boots
the voltages on the coils near processor are 0.3 -0.4 V less than it should be. Nothing seems shorted to the GND or looks wrong.

Normal boot: 1.0V
Fail boot: 0.6 -0.7 V

Did anyone had similar problems like this, I dont have a spare CPU to test it, but i see the infamous NEC Tokien capacitor on the under side of CPU socket

6ot4hr is offline   Reply With Quote
Old 12-02-2017, 12:49 AM   #2
mcplslg123
Badcaps Veteran
 
Join Date: Jun 2015
City & State: siliguri
My Country: india
Line Voltage: 220vac,60hz
I'm a: Student Tech
Posts: 1,747
Default Re: Samsung RV509 black screen, wont boot always

Replace nec tokin with 4x 330uF tantalum capacitor first. Hopefully problem will be solved.
mcplslg123 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 04:06 PM.
Did you find this forum helpful?