Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Computer Displays
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 06-02-2014, 09:03 PM   #61
bammbammfran
Badcaps Veteran
 
bammbammfran's Avatar
 
Join Date: Apr 2014
City & State: Hawley PA
My Country: USA
I'm a: Knowledge Seeker
Posts: 476
Default Re: ENVISION EN9410e 19" Monitor

Quote:
Originally Posted by Elronn View Post
This worked great. However, now that I have replaced the capacitors the display lights up for a second then shuts off. The power light stays on and green through. Any ideas on what is wrong now?
Obviously, it did not work great !!
Hard to say what is wrong without having your history on the monitor
is it an fsp043 ?
What was it doing before you changed the caps ?
If the monitor use to work, what did you notice it doing wrong before it failed ?
are you sure you installed the caps right ??
Pictures ?
bammbammfran is offline   Reply With Quote
Old 06-03-2014, 09:45 PM   #62
jandvs
New Member
 
Join Date: Jun 2014
City & State: IRVING
My Country: United States
I'm a: Knowledge Seeker
Posts: 2
Default Re: ENVISION EN9410e 19" Monitor

Mine was exactly like MG12345's in post 29 & 30. it had two 1000uF 10v, three 470uF 25v and one 470uF 10v. Like him, I couldn't see the value on the small one next to the transformer and did not replace it. Also, like him, I replaced the 470uF 10v with 470uF 25v.

I got the caps from a local mom & pop electroncs supply store for 49 cents each. I already had the tools. So total cost was just over $3.

Took about 3 hours total from teardown to repair to re-assembly. Replacing the caps was tedious.. my eyes are not what they used to be. Plus a little out of practice with the soldering iron. but......

IT WORKED!!!!! Thank you!!!

Of course, now I can't justify to my wife that new 24" 1080p monitor i've been looking at. I have a feeling this one might die again when I'm ready for it to...
jandvs is offline   Reply With Quote
Old 08-17-2015, 09:02 PM   #63
abcmojave
New Member
 
Join Date: Aug 2015
City & State: china lake ca
My Country: usa
I'm a: Knowledge Seeker
Posts: 2
Default Re: ENVISION EN9410e 19" Monitor

Just replaced two 1000 and several 470 caps and monitor works great. Replaced the 470's with 35v cause that's all I could get. I am very happy. $9 is a pretty cheap deal for a new monitor.

Pictures and thread were most helpful. Had no idea that bad caps could do this.!!!

Will now look at my misbehaving Sonny Boy solar panel inverter and see if that may be the problem with it.

ABC
abcmojave is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 09:36 AM.
Did you find this forum helpful?