Thanks for that dj_ricoh. Are these just ordinary I2C or SPI programming of EEPROM chips ( 8 pin ) ? I do a lot of microcontroller work, so I probably can conjure up something to do the job ( even have SO8 clips ).
Thanks again.
8 pin spi mostly. Voltage is either 3.3v or 1.8 so you might need to build a level shifter, or buy a programmer and 1.8v adapter. If you use a sop8 clip or solder wires to the chip the motherboard will need power to it.
hello guys my name is riccardo nice to meet you i have a problem i need a bios dump for my asus model x53s mb version K53SC X53SC-SX041V up motherboard the model is KS53SV processor I7 mounting GEFORCE GT 520MX 1GB THANKS AT ALL
hello guys my name is riccardo nice to meet you i have a problem i need a bios dump for my asus model x53s mb version K53SC X53SC-SX041V up motherboard the model is KS53SV processor I7 mounting GEFORCE GT 520MX 1GB THANKS AT ALL
post the original bios here and someone will help you
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
hi all, someone a backup for k53sv rev 3 board with nvidia 540m? the bios for 520mx results in nvidia and intel video driver error,
hope someone can help me
Upload your original bios file here.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment