Hello!
I have a W2207 that turns on for a bout 2 seconds then the backlight goes blank. I can still see the picture on the display, but it's without any light behind it.
I have taken the board apart and have attached pictures. It doesn't look like any caps are bad, but I could be wrong. I have a feeling that it's the inverter, but I don't know how to pinpoint this.
Disclaimer: I'm a bit of a noob when it comes to this type of repair, but I would really like to learn how. I may not know the proper vocabulary for a particular testing method, but I'm willing to do whatever I can to get this figured out. I have a lot of patience, so I hope I don't annoy anyone too much if I don't know what you're talking about if you tell me to try something.
Without further ado, please feast your eyes upon my boards. Thanks in advance for any help!
(The PowerBoard Back picture will not upload for some reason. I'll try a new picture later)
I have a W2207 that turns on for a bout 2 seconds then the backlight goes blank. I can still see the picture on the display, but it's without any light behind it.
I have taken the board apart and have attached pictures. It doesn't look like any caps are bad, but I could be wrong. I have a feeling that it's the inverter, but I don't know how to pinpoint this.
Disclaimer: I'm a bit of a noob when it comes to this type of repair, but I would really like to learn how. I may not know the proper vocabulary for a particular testing method, but I'm willing to do whatever I can to get this figured out. I have a lot of patience, so I hope I don't annoy anyone too much if I don't know what you're talking about if you tell me to try something.
Without further ado, please feast your eyes upon my boards. Thanks in advance for any help!
(The PowerBoard Back picture will not upload for some reason. I'll try a new picture later)
Comment