Badcaps.net Forum
Go Back   Badcaps Forums > Electronics Theory and Troubleshooting > Troubleshooting Game Consoles & Other Weird Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 08-11-2017, 11:03 AM   #1
Andrey.A
New Member
 
Join Date: Aug 2017
City & State: Cartago
My Country: Costa Rica
I'm a: Knowledge Seeker
Posts: 3
Default Assistance needed with xbox one controller

Whats up guys? So I've stumbled on this site and i was hoping to get some help with my problem.

So i have an xbox one s controller thats only a few months old and suddenly stopped working. The issue is it turns off saying it has no battery even though fresh batteries have been put in it. I took it apart to look for any issues with the connections for the batteries but everything looked fine to me (i really dont know what I'm doing). But while looking for something i must have accidentally touched "the issue" and the controller worked fine after putting it back together... for about 6 hours, and then the same problem came back. Turns off suddenly even with fresh batteries. Took it apart again and once again i didn't do much but poke around the boards, put it back together and same thing. Works perfectly for some hours and then problem comes back. What could this be? I'm so puzzled by this.. what am i touching thats bringing it back to life for a limited time?

Any help or ideas are greatly appreciated, i would really rather not buy a new one since this one's only months old. I would've loved to use the warranty but im out of the U.S. so its complicated.

Thanks!
Andrey.A is offline   Reply With Quote
Old 08-11-2017, 07:09 PM   #2
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 3,099
Default Re: Assistance needed with xbox one controller

maybe a cold solder joint somewhere?
CapLeaker is online now   Reply With Quote
Old 08-19-2017, 04:32 PM   #3
sam_sam_sam
Badcaps Veteran
 
Join Date: Jul 2011
City & State: Sunny Jacksonville FL
My Country: USA
Line Voltage: 120 Volts 60 HZ
I'm a: Knowledge Seeker
Posts: 652
Default Re: Assistance needed with xbox one controller

I second this idea that you must have a cold soldering joint some where
Look at the battery terminal and the ON / OFF switch also look at the joy sticks as well

Also you should use a magnifying glass to look at these joints if it looks dull redo the joints or if you see a lot of flux on a joint redo or cracked joints redo the joint or if some the joint is missing redo the joint

Where I work we have crane remotes that are very bad about having cracked soldering joint where the batteries are and it does the same thing may work for awhile then shuts off
__________________
9 PC LCD Monitor
6 LCD Flat Screen TV
30 Desk Top Switching Power Supply
10 Desk Top Power Supply
10 Battery Charger Switching Power Supply for Power Tool
6 18v Lithium Battery Power Boards for Tool Battery Packs
1 XBox 360 Switching Power Supply and M Board
25 Servo Drives 220/460 3 Phase
6 De-soldering Station Switching Power Supply 1 Power Supply
1 Dell Mother Board
15 Computer Power Supply
1 HP Printer Supply & Control Board * lighting finished it *


These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

1 Over Head Crane Current Sensing Board
2 Hem Saw Computer Stack Board

All of these had CAPs POOF
All of the mosfet that are taken out by bad caps

Last edited by sam_sam_sam; 08-19-2017 at 04:41 PM..
sam_sam_sam is offline   Reply With Quote
Old 08-29-2017, 09:05 AM   #4
Andrey.A
New Member
 
Join Date: Aug 2017
City & State: Cartago
My Country: Costa Rica
I'm a: Knowledge Seeker
Posts: 3
Default Re: Assistance needed with xbox one controller

Thanks guys, ill look closer for a cold solder then.
Andrey.A is offline   Reply With Quote
Old 09-01-2017, 01:03 PM   #5
Drassh
Member
 
Join Date: Apr 2017
City & State: Baja California
My Country: Mexico
I'm a: Student Tech
Posts: 34
Default Re: Assistance needed with xbox one controller

Another thing that can help to find any form of a schematic is by looking up controller mods.

These are from the first model controls and use them as a comparasen.
Drassh is offline   Reply With Quote
Old 09-05-2017, 08:59 AM   #6
kc8adu
Super Moderator
 
kc8adu's Avatar
 
Join Date: Nov 2003
City & State: dayton ohio
My Country: U.S.A!
Line Voltage: 12vdc,120/240vac,480vac 3ph on my bench
I'm a: Professional Tech
Posts: 8,179
Default Re: Assistance needed with xbox one controller

those pics show me that battery contact assy does not have strain relieving pins.
broken solder there would be a prime suspect.
nice find Drassh!
kc8adu is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2017
Powered by vBulletin ®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 11:00 AM.

Did you find this forum helpful?