Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Hp probook 4420s dead.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hp probook 4420s dead.

    Hp probook 4420s dead
    i checked pq3 voltages 1 gate 19v 3 drain 19.5 v 4 sorce ov [VAPWR]
    i suspect gate voltage where are place PR123 on board .[page no 36]

    +3vpcu present for io page no 27
    Attached Files

    #2
    Re: Hp probook 4420s dead.

    check voltage on all pins of pu2

    Comment


      #3
      Re: Hp probook 4420s dead.

      zoom in at the top of the pcb in picture near pd2

      Comment


        #4
        Re: Hp probook 4420s dead.

        check pq2 pq3 pq7. look like broken

        Comment


          #5
          Re: Hp probook 4420s dead.

          there was isolation tape
          Just cook it! It's already broken.

          Comment


            #6
            Re: Hp probook 4420s dead.

            Originally posted by dj_ricoh View Post
            there was isolation tape
            lol, looks like my eyes now broken.

            Comment


              #7
              Re: Hp probook 4420s dead.

              Tell me pq9 pq11 gate voltage when PWR BTN press.
              Thanks to all.

              Comment


                #8
                Re: Hp probook 4420s dead.

                ??????

                Comment


                  #9
                  Re: Hp probook 4420s dead.

                  PL CHECK these always voltage
                  +3.3V_ALWP IT SHOULD BE 3.3V IN PAGE NO 38
                  +5V_ALWP IT SHOULD BE 5V IN PAGE NO 38

                  Also check 3.3v at bios chip it should be there in any case, if 3.3v not availabe at bios chip then track the same

                  Comment


                    #10
                    Re: Hp probook 4420s dead.

                    3vpcu on bios pin no 8 preseent.

                    Comment


                      #11
                      Re: Hp probook 4420s dead.

                      please tell me kbc EC RESET pin no & about kbc crystal wavefoam.

                      Thanks sanehdeep.
                      Last edited by aanan; 11-15-2014, 07:50 AM.

                      Comment


                        #12
                        Re: Hp probook 4420s dead.

                        ADP_ID signal to gnd got o hms page no 37 i search on board pd35 & pr60 please helpfor coponant searching.

                        Comment


                          #13
                          Re: Hp probook 4420s dead.

                          hi aaanan
                          why you searching this signal this is adapter id pin this is only repleted to charging circuit only. the laptop should on if problem with this circuit.

                          and kbc crystal Y7000 should be 32.768khz waveform just oscillating wave form not and specified signal waveform .check it with frequency meter or oscilloscope.

                          Comment


                            #14
                            Re: Hp probook 4420s dead.

                            HI AANAN there is only two component for resonsible for shorint at ADP_ID pin

                            kbc is or PD35

                            Comment


                              #15
                              Re: Hp probook 4420s dead.

                              FROM AANAN THIS IS CLOSED NOW HE REPALCED pd35 and now the laptop working ok,

                              PD35 was short

                              Comment


                                #16
                                Re: Hp probook 4420s dead.

                                YES Friend.
                                Thanks to all.

                                Comment


                                  #17
                                  Re: Hp probook 4420s dead.

                                  Dear Friends,
                                  I have almost a same problem, but My laptop is turning on by Battery but won't power up by Charger. I checked the circuit, where i analyse that there are no voltages on PQ3 Pin# 4, but Pin1 and Pin3 have voltages.
                                  And please let me know what is +VAPWR and what is +VINVA?
                                  By the way i've changed LM393 PU19 but there is noting happen.
                                  One more thing, there are no VIN Voltages, when i connect the charger. I mean when i check the VIN Voltages on PD2 or BQ24740 Pin# 28. No VIN voltages present. . .
                                  Please help me out. . .
                                  Thanks a lot

                                  Comment


                                    #18
                                    Re: Hp probook 4420s dead.

                                    Great...

                                    Comment

                                    Working...
                                    X