Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 10-07-2019, 10:58 PM   #1
Huscarl17
New Member
 
Join Date: Apr 2018
City & State: Quincy IL USA
My Country: USA
I'm a: Knowledge Seeker
Posts: 3
Default Hawking 3 port print server

Found several in a box no PS with them so ordered new from DigiKey.
None work correctly some power up but can not see them on the network and can not connect with the Hawking setup software.

Does anyone have any experience repairing?

I am going to do a complete recap on two of the ones that light up.


Will post followups.
Huscarl17 is offline   Reply With Quote
Old 10-08-2019, 08:52 PM   #2
Curious.George
Badcaps Veteran
 
Join Date: Nov 2011
Posts: 1,482
Default Re: Hawking 3 port print server

Quote:
Originally Posted by Huscarl17 View Post
Found several in a box no PS with them so ordered new from DigiKey.
None work correctly some power up but can not see them on the network and can not connect with the Hawking setup software.
Monitor network traffic from (and to) the device shortly after powerup to see if it is looking for a DHCP lease, BOOTP, TFTP access, etc.

If there are indicator LEDs on the NIC connector, see if they "wink" at all.

If they're wireless devices, then you'll have to snoop the wireless traffic, instead.

Last edited by Curious.George; 10-08-2019 at 08:53 PM..
Curious.George is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 07:09 PM.
Did you find this forum helpful?