Badcaps.net Forum
Go Back   Badcaps Forums > Electronics Theory and Troubleshooting > Troubleshooting Laptops, Portable, and Mobile Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 09-11-2017, 12:32 PM   #1
Bisketti
Senior Member
 
Join Date: Oct 2013
City & State: Wicklow
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 137
Default DA0r76MB6D0 black screen .2a drawn

Hi Im working on a DA0r76MB6D0 board no schematics only boardview avaiable but using the attached schematics.
The unit was originally dead no adapter light no response from powerbutton.
Changed bios and very kept failing so changed chip and tried original bios ,same thing. Replaced sio same so tried different bios and board responds to powerbutton and only draws .2a and black screen, cpu gets warm.
Pl23 1.8v
pl21 0.8v
pl8 0.8v
Pl5 0.9v
pl9 2.2v
pl17 3.3v
pl18 5v
pl19 1.5v

kbc_rst 0v
mainon 3.3v
s5on 3.3v
dwbswon#3.3v
ec_rcin# 3.3v
kbc_p+3v 3.3v
vcore 3.3v
ecpwrok 3.3v
ecwrst 3.3v

Help appreciated
Attached Files
File Type: zip HP Pavilion 15=1=Quanta R76.zip (376.1 KB, 15 views)
File Type: zip quanta_r7x_r1a_schematics.zip (924.8 KB, 16 views)
Bisketti is offline   Reply With Quote
Old 09-11-2017, 01:04 PM   #2
piernov
Badcaps Veteran
 
Join Date: Jan 2016
City & State: Valbonne, 06
My Country: France
I'm a: Knowledge Seeker
Posts: 356
Default Re: DA0r76MB6D0 black screen .2a drawn

I guess it's not POSTing at all?
Check voltage on APU_RST#, APU_PWRGD, +0.95VS5. Any activity on BIOS CS# pin?
__________________
OpenBoardview http://openboardview.org | IRC #openboardview@irc.freenode.net
piernov is offline   Reply With Quote
Old 09-11-2017, 04:17 PM   #3
Bisketti
Senior Member
 
Join Date: Oct 2013
City & State: Wicklow
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 137
Default Re: DA0r76MB6D0 black screen .2a drawn

No not posting.Also it switches on by power button but wont switch off by it.
APU_RST# 1.7v at R242
APU_PWRGD 1.8v
+0.95VS5 ok .95v
See attached pic of bios cs# pin
Attached Images
File Type: bmp NewFile0.bmp (146.3 KB, 6 views)
Bisketti is offline   Reply With Quote
Old 09-13-2017, 03:47 PM   #4
Bisketti
Senior Member
 
Join Date: Oct 2013
City & State: Wicklow
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 137
Default Re: DA0r76MB6D0 black screen .2a drawn

SUSB# 3.3v
SUSС# 3.3v

Any ideas?
Bisketti is offline   Reply With Quote
Old 09-14-2017, 01:05 PM   #5
piernov
Badcaps Veteran
 
Join Date: Jan 2016
City & State: Valbonne, 06
My Country: France
I'm a: Knowledge Seeker
Posts: 356
Default Re: DA0r76MB6D0 black screen .2a drawn

Everything looks fine to me so I don't know why the BIOS POST would fail. Make sure the RAM & CPU are good and compatible with the board, check if any IC (Ethernet/audio/card reader) gets hot or looks bad.
Make sure you are using a good BIOS, maybe try with another dump.
piernov is offline   Reply With Quote
Old 09-14-2017, 01:57 PM   #6
Bisketti
Senior Member
 
Join Date: Oct 2013
City & State: Wicklow
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 137
Default Re: DA0r76MB6D0 black screen .2a drawn

I have tried about 4 different dumps all exactly same result. Im trying to find out why KBC_RST# from APu is 0v. I would like the signal order diagram so I can check the order the signals come in.
Bisketti is offline   Reply With Quote
Old 09-14-2017, 05:18 PM   #7
piernov
Badcaps Veteran
 
Join Date: Jan 2016
City & State: Valbonne, 06
My Country: France
I'm a: Knowledge Seeker
Posts: 356
Default Re: DA0r76MB6D0 black screen .2a drawn

Ah yep, overlooked that one.
KBC_RST# comes from PCIRST# apparently. And PCIRST# being low doesn't make sense because APU_RST# is high. The PCI reset signal should come before the CPU reset signal AFAIK. Check R510, but I guess you've an issue with the FCH.
You can take a look at an AMD chipset datasheet. I can't find this specific one but another chipset should already give you an idea.
piernov is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2017
Powered by vBulletin ®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 10:58 PM.

Did you find this forum helpful?