Announcement

Collapse
No announcement yet.

looking for a source for a Diode for P65VT60 SC card

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    looking for a source for a Diode for P65VT60 SC card

    Hello,
    I am attempting to repair the SC card in a P65VT60.
    I have found the transistors on ebay, but there is an elusive diode on the board that is shorted out that I can't find without waiting 5 weeks for a CHina delivery.
    The diode is:
    RFUH20T3S diode D401 on the board.
    I believe it is
    D16401
    panasonic part # B0FBCN000012

    even though I have looked extensively, I am open to suggestions.
    It's used in a handful of other panasonics.
    thanks,
    dave in NJ

    #2
    Re: looking for a source for a Diode for P65VT60 SC card

    Have you tested it out of circuit ? The 2 forward legs are tied together and will read as a short.

    Comment


      #3
      Re: looking for a source for a Diode for P65VT60 SC card

      Originally posted by tvtimmy View Post
      Have you tested it out of circuit ? The 2 forward legs are tied together and will read as a short.
      thanks for the suggestion, on the 6 transistors and this diode, there was a short on all three combos of legs.
      1 to 2, 2 to 3 and 3 to 1, all shorts

      Comment


        #4
        Re: looking for a source for a Diode for P65VT60 SC card

        it's made by ROHM not Panasonic

        Comment


          #5
          Re: looking for a source for a Diode for P65VT60 SC card

          Originally posted by stj View Post
          it's made by ROHM not Panasonic
          thanks, yes, I can buy it from ROHM but the shipping takes 5 weeks!

          Comment


            #6
            Re: looking for a source for a Diode for P65VT60 SC card

            While on the board, the diode will test as a short. That's because the igbt's are shorted. Remove them first and your diode should be fine.

            Comment


              #7
              Re: looking for a source for a Diode for P65VT60 SC card

              Originally posted by tvtimmy View Post
              While on the board, the diode will test as a short. That's because the igbt's are shorted. Remove them first and your diode should be fine.
              haha!
              you are so right!
              Thank you Sir!

              Comment

              Working...
              X