![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Join Date: Jan 2018
City & State: Newport News,Va
My Country: USA
I'm a: Knowledge Seeker
Posts: 8
|
![]() I have picked up a Gigabyte GV-RX570Gaming-4gd rev-2.0. I have narrowed the problem down to a bad NKS GS7103 ,RFG7LAKVS. I can find the GS7103 all over the web.Here is the problem ,the number below the GS7103 does not match the one that is bad .That number is RFG7LAKVS closet I can find is RFG7LAKWA. Thanks at this point I am pulling my hair out. SO what will work is what I am asking .
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Jan 2017
City & State: Ceuta
My Country: Spain
I'm a: Knowledge Seeker
Posts: 96
|
![]() Hi, as far as I know, the other letters doesnt matter, its a low dropout regulator, just ensure you buy the same encapsulate (size) and pinout, almost sure the PSOP-8 will be the one you need and you are ready to go. If im not correct, please some one tells me.
Have luck |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|