hi. Im new here and I am new with M/B repair.
I had been browsing over badcaps.net for a while when i read about the symptoms of bad caps. I was repairing a p4mdut motherboard but the problem became worst
The problem was the computer was rebooting constantly. when i inspected the board, i noticed a lot of bad caps. i told the owner that if i tried to fix it, it will either be the problem be solved or become worst so i tried to fix it.
When i removed the capacitor(1000uF.6.3v) i couldnt find an exact replacement so I tried using 1000uF/10v. Now Im faced with pc not booting up. I notice that it is so slow to detect the hdd and it does not boot.
I am open to suggestions on repair. This is my very 1st attempt to fix a broken mb and i really need a lot of newbie tips
I had been browsing over badcaps.net for a while when i read about the symptoms of bad caps. I was repairing a p4mdut motherboard but the problem became worst
The problem was the computer was rebooting constantly. when i inspected the board, i noticed a lot of bad caps. i told the owner that if i tried to fix it, it will either be the problem be solved or become worst so i tried to fix it.
When i removed the capacitor(1000uF.6.3v) i couldnt find an exact replacement so I tried using 1000uF/10v. Now Im faced with pc not booting up. I notice that it is so slow to detect the hdd and it does not boot.
I am open to suggestions on repair. This is my very 1st attempt to fix a broken mb and i really need a lot of newbie tips
Comment