TOSHIBA 40L3453DB red-green blinking light

[Diah]

Originally Posted by Fergal22

I doubt it will work now as when i tried to write to U11 on auto, it erased it first then failed on the writing part so the chip s blank
I will try post 70 if that don't work i will buy another mainboard for it

U11, no sense at all they make dump for it.. as its part of firmware when it updated it will write part of the profile on it.. so even its blank now when it worked will not able to scan channel. and this small issue.

try post#70 also you can just put any mboot on the usb , it will not flashed. only as sync to start from usb.

[Fergal22]

Originally Posted by dick_barton

I don't know if this site is any use to you offering a bin file for your set.
https://repairalltv.com/toshiba-40l3...mb95-download/

Or

http://www.dl.toshiba.com/dtv/NA/GB/EN/40L3453DB.html

I have already tried those with no success but thanks for helping

Originally Posted by Diah

U11, no sense at all they make dump for it.. as its part of firmware when it updated it will write part of the profile on it.. so even its blank now when it worked will not able to scan channel. and this small issue.

try post#70 also you can just put any mboot on the usb , it will not flashed. only as sync to start from usb.

Tried post 70 but still no joy, i have ordered a mainboard off ebay, should get it Friday, i will let you know how i get on

Thanks or all your help and advice, its appreciated

[Diah]

Originally Posted by Fergal22

Tried post 70 but still no joy, i have ordered a mainboard off ebay, should get it Friday, i will let you know how i get on

Thanks or all your help and advice, its appreciated

you welcome.. but still i would love to solve this mysterious boards..
from all SPI dumps you flashed, we got red green flashing / green flashing /.. its sound there are no any sign from U13 NAND. so you have time until the replacements boards to arrive.. can you check if the NAND had on pins 12 & 37 3.3V ?

[Diah]

one things more to let this threat complete with all solution , in case we flash mboot to the spi flash and there are no response from RC, there are working around by using the same CH314A adapter as serial Adapter with level 3,3V to read and write via RX & TX

On the Adapter there are jumpers need to switch it so it will be serial ( the driver are included at my previous attachment file )

we connect the TV from scart sockets
Pin 10 = RX -------> connect to Adapter TX
Pin 12 = TX -------> connect to Adapter RX
Pin 13 = GND to Adapter GND

configure the port of Mstar ISP Tool and starting the work according to the pdf how to update MB90 /MB95

the above for windows users... who are using Linux much easy to have above with terminal command line

[Fergal22]

Originally Posted by Diah

one things more to let this threat complete with all solution , in case we flash mboot to the spi flash and there are no response from RC, there are working around by using the same CH314A adapter as serial Adapter with level 3,3V to read and write via RX & TX

On the Adapter there are jumpers need to switch it so it will be serial ( the driver are included at my previous attachment file )

we connect the TV from scart sockets
Pin 10 = RX -------> connect to Adapter TX
Pin 12 = TX -------> connect to Adapter RX
Pin 13 = GND to Adapter GND

configure the port of Mstar ISP Tool and starting the work according to the pdf how to update MB90 /MB95

the above for windows users... who are using Linux much easy to have above with terminal command line

Hi, i have had my vaccine jab today and it make me feel very unwell
I will try this tomorrow if i feel any better
did not want you waiting on a reply