Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 09-22-2022, 09:42 PM   #1
jpyerry
Member
 
Join Date: Jan 2013
City & State: Albany, NY
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 77
Default Shuttle HOT-433 component identification

Long time, no post for me.

I was hoping I could lean on you to help me identify a component.

I know that this is 9 pin SIP resistor array, I am guessing it is 1.5kOhms. The markings are so generic though that I cannot glean any further information about it. Google searches have not revealed any useful information.

I am hoping somebody here might be able to tell me a little more about it, is it isolated, bussed, circuit configuration, etc?

It came from a Shuttle HOT-433 486 motherboard, I noticed that it was cracked while I was doing a visual inspection of the board. It was from RP10 on the board.

Thanks for any help you can give.
Attached Images
File Type: jpg 20220922_154632.jpg (747.1 KB, 8 views)
jpyerry is offline   Reply With Quote
Old 09-22-2022, 10:35 PM   #2
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 8,217
Default Re: Shuttle HOT-433 component identification

Check it with your meter, likely pin1 is common and each other pin will be 1.5k
R_J is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 05:19 PM.
Did you find this forum helpful?