Long time, no post for me.
I was hoping I could lean on you to help me identify a component.
I know that this is 9 pin SIP resistor array, I am guessing it is 1.5kOhms. The markings are so generic though that I cannot glean any further information about it. Google searches have not revealed any useful information.
I am hoping somebody here might be able to tell me a little more about it, is it isolated, bussed, circuit configuration, etc?
It came from a Shuttle HOT-433 486 motherboard, I noticed that it was cracked while I was doing a visual inspection of the board. It was from RP10 on the board.
Thanks for any help you can give.
I was hoping I could lean on you to help me identify a component.
I know that this is 9 pin SIP resistor array, I am guessing it is 1.5kOhms. The markings are so generic though that I cannot glean any further information about it. Google searches have not revealed any useful information.
I am hoping somebody here might be able to tell me a little more about it, is it isolated, bussed, circuit configuration, etc?
It came from a Shuttle HOT-433 486 motherboard, I noticed that it was cracked while I was doing a visual inspection of the board. It was from RP10 on the board.
Thanks for any help you can give.
Comment