Announcement

Collapse
No announcement yet.

Laser Level Not Powering

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Laser Level Not Powering

    Hi guys,

    Have a DeWalt Laser DW087 Level in.

    Came in not powering.
    Right now I have it powering of powersupply but wont power from batteries, even tho I have the 6v at the end of the wires coming from battery.

    When I solder the battery wires to board, 6v is there too, hit power switch and nothing.

    Solder the wires from power supply, 6v there, hit power and all good.

    Any ideas what the problems is and how do I solve it?

    Will attach pics now..

    Thanks,
    Liam

    #2
    Re: Laser Level Not Powering

    what amps does the batteries output? and what amps is your power supply suppling?

    Comment


      #3
      Re: Laser Level Not Powering

      Pics..
      Attached Files

      Comment


        #4
        Re: Laser Level Not Powering

        When you have the batteries connected to the board and then hit the power switch, is the Voltage still showing 6V or it drops down? The battery is also rated at 6V?
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment


          #5
          Re: Laser Level Not Powering

          bad wires, bad battery, or bad contact if the battery is removeable.

          Comment

          Working...
          X