Hello,
The laptop doesn't boot (black screen) after turning on. There were places with corrosion on the board, mainly on the EC, but not very serious.
Cleaned everything. After powering on the fan starts working and only the backlight of the LCD turns on (but very dim).
There is no signal from the HDMI connector either.
I tried to flash the BIOS but to no luck.
* BIOS dumps from here - viewtopic.php?f=40&t=102989&p=770516&hilit=%2Ax302ua%2A#p770516
and https://www.badcaps.net/forum/showthrea ... ght=x302ua
Main voltages are: 1.12v 5.24v 3.39v 12.51v
I measured the voltages to the processor, but not sure if they are good (see img).
Any one have an idea what to do next?
The laptop doesn't boot (black screen) after turning on. There were places with corrosion on the board, mainly on the EC, but not very serious.
Cleaned everything. After powering on the fan starts working and only the backlight of the LCD turns on (but very dim).
There is no signal from the HDMI connector either.
I tried to flash the BIOS but to no luck.
* BIOS dumps from here - viewtopic.php?f=40&t=102989&p=770516&hilit=%2Ax302ua%2A#p770516
and https://www.badcaps.net/forum/showthrea ... ght=x302ua
Main voltages are: 1.12v 5.24v 3.39v 12.51v
I measured the voltages to the processor, but not sure if they are good (see img).
Any one have an idea what to do next?
Comment