Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting TVs and Video Sources
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 07-08-2012, 02:54 PM   #1
Captin21
New Member
 
Join Date: Jul 2012
City & State: Dalmeny Saskatchewan
My Country: Canada
I'm a: Knowledge Seeker
Posts: 2
Default Plasma new on on me

I have a Panasonic 42 Plasma pt # TH 42pz80U any how when i got it it looked good but it appeared to be that someone or somehow the aspect had been shrunk up to where on each side there is a 4 inch dark section the top and bottom are fine just the sides i cannot adjust that back and it affects the menu and anything else it is not the buffer boards i can remove the straps and it is different size and different looking in general I then thought it was the A board and looked it over couldn't see nor find any issue so i sent it in for repair thinking it must be it . It came back with a note nothing wrong with this board ??? Now what could it be the little control board that attaches to the buffers but like I said if i remove the affected leash area it looks very different . any ideas i could attach a picture but it looks normal aside from the two sides are blacked out about 4 to 5 inches ,
__________________
Hobbiest with some skills need to learn Lots also have a large colection of spare boards if anyone needs ask I may have
Captin21 is offline   Reply With Quote
Old 07-08-2012, 03:44 PM   #2
tom66
Wants a Tesla
 
tom66's Avatar
 
Join Date: Apr 2011
City & State: Leeds
My Country: UK
Line Voltage: 230Vac 50Hz
I'm a: Student Tech
Posts: 31,619
Default Re: Plasma new on on me

Can you show us a picture? Have you tried the ASPECT ratio button?
__________________
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
Free service manuals: http://www.toms-service-manuals.com/ -- 72 LED/LCD TVs, 5 monitors, 28 plasma TVs, and 2 AVR 6.1 amplifiers fixed!

2 Pioneer KURO 9G, 12 Panasonic LCD/Plasma, 1 Sony LCD, 1 NEC Plasma, 2 Yamaha HTS, 5 Sharp LCDs, 5 Toshiba LCDs, 7 Philips Plasma/LCD, 1 Hitachi Plasma, 11 LG LCD/Plasma, 18 Samsung LED/LCD/Plasma, 1 Thomson Plasma, 1 Atec LCD, 1 Hanspree LCD, 1 Xerox LCD, 1 Harwa LCD, 2 Proview LCD, 2 Hyundai LCD, 1 "Onn" LCD, 1 Grundig LCD, 1 Dell LCD, 1 iiyama LCD, 1 Acer LED, 1 Logik LCD, 1 Baird (China) LCD, 6 Bush LCDs, 22 Vestel LCDs (Best->Worst)
tom66 is offline   Reply With Quote
Old 07-09-2012, 05:18 PM   #3
cadiman
Badcaps Veteran
 
Join Date: Mar 2010
City & State: chesterland Ohio
Posts: 398
Default Re: Plasma new on on me

Sounds like it had the wrong board installed (smaller model) or you still have an issue with settings.

You should be able to really stretch the picture out on a plasma pending aspect settings.

Also make sure your input is not the problem.

The panasonics have a lot of setting adjustments and having the correct remote is a must with a plasma tv.

Is the pz80u a commercial moniter?
cadiman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2018
Powered by vBulletin ®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 11:57 PM.

Did you find this forum helpful?