Go Back   Badcaps Forums > Motherboards with Bad Capacitors > All Others Motherboards
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 03-20-2006, 11:39 AM   #21
MD Willington
Badcaps Veteran
MD Willington's Avatar
Join Date: Sep 2004
City & State: WA, USA.
Posts: 702
Default Re: SL-75FRN2-L mem errors after recapping

Generic ram will almost always bite you in the butt.. don't buy value ram seconds, that stuff is meant for the shredder...the bean counters will not let them shred it though.

It's not crap, it's manure, we can sell it as fertilizer --> same line of thinking...
Ya'll think us folk from the country's real funny-like, dontcha?

The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.
MD Willington is offline   Reply With Quote
Old 03-21-2006, 02:55 AM   #22
Badcaps Veteran
larrymoencurly's Avatar
Join Date: Oct 2004
Posts: 947
Default Re: SL-75FRN2-L mem errors after recapping

Maybe it's not your caps but your RAM because a huge percentage of RAM I've bought in the past few years, maybe 30%, failed diagnostics when run at the BIOS default settings, including the Kingston ValueRAM PC3200 I bought last week (I had to exchange it twice). Reportedly some mobo chipsets, including the nForce series, are more particular than others, and a lot more PC3200 RAM has failed with my nForce3 mobo than with my VIA VT400A mobo.

I test by running both MemTest86 and Gold Memory overnight because I had two modules pass one diagnostic but not the other, and a third module took 4-5 hours before an error was detected (not a glitch -- the error came back every 4-5 hours).
larrymoencurly is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 02:29 PM.
Did you find this forum helpful?