Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting TVs and Video Sources
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 07-16-2018, 08:08 PM   #1
audiofreak19
Badcaps Veteran
 
Join Date: Apr 2013
City & State: crofton,md
My Country: usa
I'm a: Knowledge Seeker
Posts: 547
Default Identification of Capacitor

I have 3 small blue disc capacitors that I need to replace. The only marking on them is the number 106. Any idea how to find replacements of these
audiofreak19 is offline   Reply With Quote
Old 07-16-2018, 08:19 PM   #2
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 3,038
Default Re: Identification of Capacitor

106 = 10f, now if we had a picture and where it is used....

Last edited by R_J; 07-16-2018 at 08:21 PM..
R_J is offline   Reply With Quote
Old 07-16-2018, 08:22 PM   #3
attainteddragon
Badcaps Veteran
 
Join Date: Apr 2013
City & State: victoria
My Country: australia
Line Voltage: 240VAC 50hz
I'm a: Knowledge Seeker
Posts: 711
Default Re: Identification of Capacitor

http://www.kiloohm.info/3-digit-capacitor/106

here is a calculator site you can use.
__________________
WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?
attainteddragon is offline   Reply With Quote
Old 07-16-2018, 08:31 PM   #4
audiofreak19
Badcaps Veteran
 
Join Date: Apr 2013
City & State: crofton,md
My Country: usa
I'm a: Knowledge Seeker
Posts: 547
Default Re: Identification of Capacitor

Its used on a y main board. My phone wont let me attach the photo but here is a link to the caps Im having issues with.
https://m.youtube.com/watch?v=n6h7P-ZATnw
audiofreak19 is offline   Reply With Quote
Old 07-16-2018, 09:44 PM   #5
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 3,038
Default Re: Identification of Capacitor

I can't be sure as I don't have that board but I would guess something like Ceramic 10f 50volt. Maybe someone else has replaced them and knows what they are exactly.
R_J is offline   Reply With Quote
Old 07-16-2018, 10:02 PM   #6
audiofreak19
Badcaps Veteran
 
Join Date: Apr 2013
City & State: crofton,md
My Country: usa
I'm a: Knowledge Seeker
Posts: 547
Default Re: Identification of Capacitor

Yea I don’t know how they expect someone to know what kind of cap this is with the only marking of 106 on it.
audiofreak19 is offline   Reply With Quote
Old 07-16-2018, 10:49 PM   #7
budm
Badcaps Veteran
 
budm's Avatar
 
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 34,319
Default Re: Identification of Capacitor

What is the P/N of U5014?
Those 3 caps (C5050, 5152, 5153) look to be connected in parallel and used as filter cap on the Cathode pin of the D5005, the Anode is connected to one of the Transformer T5000. That section looks to be SMPS, the IC U5014 is for driving the primary winding of T5000.
Did you remove the 3 caps to check the capacitance?
Is this your board: LJ92-01906A?
http://www.shopjimmy.com/samsung-lj9...n-drive-1.htm#
__________________
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956

Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999

Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl

Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/

TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809

Last edited by budm; 07-16-2018 at 10:50 PM..
budm is offline   Reply With Quote
Old 07-16-2018, 10:59 PM   #8
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 3,038
Default Re: Identification of Capacitor

I can't see the voltage being that high, maybe 25v cap wouldbe fine. They seem to be used as the filter caps for the voltage supplied by D5005, they seem to be in parallel for a total of 30f. You should be able to measure the voltage and pick a cap that is higher.
Poly caps at 10f look quite large even at lower voltages
Ceramic at 10f look about the right size
https://www.digikey.com/products/en/...=1&pageSize=25
R_J is offline   Reply With Quote
Old 07-17-2018, 06:13 AM   #9
chrismurphy
Senior Member
 
Join Date: May 2014
City & State: adelaide
My Country: australia
Line Voltage: 240 volts 50 HZ
I'm a: Professional Tech
Posts: 198
Default Re: Identification of Capacitor

Replaced many of these 10 uf at 50 v ceramic
got mine from RS components
https://au.rs-online.com/web/p/ceram...itors/8118373/
chrismurphy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2018
Powered by vBulletin ®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 12:03 PM.

Did you find this forum helpful?