Announcement

Collapse
No announcement yet.

N5010 colour issue after conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    N5010 colour issue after conversion

    Facing orange colour issue on screen after conversion discrete to uma..what will be possible solution..
    Attached Files

    #2
    Re: N5010 colour issue after conversion

    very likely PCH faulty if those RN connected to lvds connectors are ok and connector itself is not damaged.

    Comment


      #3
      Re: N5010 colour issue after conversion

      do u know that display is 100% ok? looks like there are many issues on it

      Comment


        #4
        Re: N5010 colour issue after conversion

        Pressure marks on screen,replace it. test on hdmi .
        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment


          #5
          Re: N5010 colour issue after conversion

          Screen nd display cable already checked...

          Comment


            #6
            Re: N5010 colour issue after conversion

            I checked for RN connector rn7701 which seems to be for colour that is okk...
            Plzz mention other rn connector that should be checked...if possible

            Comment


              #7
              Re: N5010 colour issue after conversion

              try to heat up UMA to 130c to check broken ball

              Comment

              Working...
              X