Sharp lc-52d62u won't power on 5v sub is present

[frankriz99]

I had a sharp with a bad psu, i replaced the whole PSU we a new one from shopjimmy
part# 184wjqz

i now have all my voltages now correct except pin3 and pin4 that give me 0.24V and should be 12V

I hear tv clicking and trying to turn on now, but no pic or sound.

any idea why i am not getting the 12V out of the new PSU now on Pin3 and 4

[budm]

Re: Sharp lc-52d62u won't power on 5v sub is present

We need good clear hi-res pictures of YOUR boards so we can see what we are dealing with, that will be a starting point.
EDIT: you already have another thread for the same TV!

[frankriz99]

Re: Sharp lc-52d62u won't power on 5v sub is present

here are the best images i could upload through photo bucket.

PSU board is new.
voltages as follows

13.41V
13.41V
0V
0V
9.9V
9.9V
0v
0v
0.24v should be 12V
0.24V should be 12V
0V
6V

[frankriz99]

Re: Sharp lc-52d62u won't power on 5v sub is present

also have flashing red led blinking constantly on main board