Hi all. So i have the forementioned tv. I plug it in, click the power button. I hear a startup chime from it. Backlights come on immediately, Then I kind of see the box that says no signal but it's very faint and kind of discolored. There's also a bit of a static overlay. I tried to capture it with my phone but my camera on my phone has seen better days. My immediate thought is either a problem with the screen or more than likely something wrong with the T-con board. However, it's been a while since i've messed with tv's like this. Any insight would be helpful. There are also what i would call vertical bars similliar to when you see a brightness adjustment test shown in the picture below. It's not quite that but the bars look kind of like it.
Announcement
Collapse
No announcement yet.
Samsung Ln32A300J1D Display issue
Collapse
X
-
Re: Samsung Ln32A300J1D Display issue
http://www.shopjimmy.com/samsung-bn8...-con-board.htm Info.
Pay ATTENTION to the instructions in red " Confirm part number by finding 35-D026367 on the white sticker.
"IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen)"
-
Re: Samsung Ln32A300J1D Display issue
Notice the sticker on back of YOUR tcon, you need to match those highlighted numbers to sticker on your replacement tcon.Last edited by nomoresonys; 03-19-2018, 07:57 PM.
Comment
Comment