Re: Rca RLED4010A power supply
connector 1
GND/GND/+5V/+5V/PS/empty/+5V/+5V/GND/GND/GND/+12V/+12V
connector 2
+24/+24/GND/GND
connector 3
+24/+24/+24/+24/GND/GND/CON7/CON7
connector 4
24/24/24/24/24/gnd/gnd/gnd/gnd/gnd/NC/ONOFF/ADJ/NC
On stanby mode,i get voltage(5V) at the 'ps' pin on the connector 1 only.
At power on,i get the good voltage to every connector,beside the connector 4 that don't receive 24v at the fifth pin but there is no wire connected there so i guess it's ok.
connector 1
GND/GND/+5V/+5V/PS/empty/+5V/+5V/GND/GND/GND/+12V/+12V
connector 2
+24/+24/GND/GND
connector 3
+24/+24/+24/+24/GND/GND/CON7/CON7
connector 4
24/24/24/24/24/gnd/gnd/gnd/gnd/gnd/NC/ONOFF/ADJ/NC
On stanby mode,i get voltage(5V) at the 'ps' pin on the connector 1 only.
At power on,i get the good voltage to every connector,beside the connector 4 that don't receive 24v at the fifth pin but there is no wire connected there so i guess it's ok.
Comment