Hello to all,
I know this has probably been beaten to death, but I have an Olevia that had the power up problem, someone else has changed the entire power supply module, but it still doesn't power up. I checked for voltages, but only have 5 volts on one line coming from the supply. I check at the power switch and I have the 5 volts on one side. When I hit the switch it drops down to 3.2 volts,
I assume that the main board controls the rest of the power supply and it must be pulling the 5 volts down???? Any help>?
THanks
Bill
I know this has probably been beaten to death, but I have an Olevia that had the power up problem, someone else has changed the entire power supply module, but it still doesn't power up. I checked for voltages, but only have 5 volts on one line coming from the supply. I check at the power switch and I have the 5 volts on one side. When I hit the switch it drops down to 3.2 volts,
I assume that the main board controls the rest of the power supply and it must be pulling the 5 volts down???? Any help>?
THanks
Bill