Re: Vizio E55-C2, appears dead, no 20V, main cap always 385V, no PSon
I think that it may be Pin 4 (Soft Start) and not Pin 8. The data sheet shows pin 1 on the slanted side of the IC which unfortunately I cannot tell from the photo, however Pin 5 is ground so that would confirm whether it's pin 4 or Pin 8.
Looking again at the photo it does look as though it's Pin 5 and the data sheet does show 2 x 10uF caps connected to it.
Originally posted by DXseekerMO
View Post
Looking again at the photo it does look as though it's Pin 5 and the data sheet does show 2 x 10uF caps connected to it.
Comment