Hey, all.
This TV is giving the 1 fast/1 slow flash code indicating a lamp error. So, I tore it down and tested all 4 of the LED strips and all of the LEDs light up fine. I see no dead, or dim LEDs compared to the rest. What else could be going on here?
A little back story...at one time I was able to reset the lamp error count and got the TV to turn on. I don't exactly recall what I did to do so, but I wasn't ready to tear into it at the time so I put it away in the junk/projects room and forgot about it. Fast forward about a year+ later, I had another TV(15 year old Panasonic Plasma that I've owned since new) die on me, and I doubt I'll bother trying to fix it being it's only 720p. So, I remembered about this Sharp and pulled it out. This time, trying the reset procedures I could find online and in the service manual(which is terrible), I could not get it to turn on. Not sure if something else has failed, or if I didn't do it right, or if this and the fact that the LED strips seem to be fine are pointing to another problem.
Any assistance would be greatly appreciated.
This TV is giving the 1 fast/1 slow flash code indicating a lamp error. So, I tore it down and tested all 4 of the LED strips and all of the LEDs light up fine. I see no dead, or dim LEDs compared to the rest. What else could be going on here?
A little back story...at one time I was able to reset the lamp error count and got the TV to turn on. I don't exactly recall what I did to do so, but I wasn't ready to tear into it at the time so I put it away in the junk/projects room and forgot about it. Fast forward about a year+ later, I had another TV(15 year old Panasonic Plasma that I've owned since new) die on me, and I doubt I'll bother trying to fix it being it's only 720p. So, I remembered about this Sharp and pulled it out. This time, trying the reset procedures I could find online and in the service manual(which is terrible), I could not get it to turn on. Not sure if something else has failed, or if I didn't do it right, or if this and the fact that the LED strips seem to be fine are pointing to another problem.
Any assistance would be greatly appreciated.
Comment