Hakko 900M soldering tips from Cantonmade, are they good?

[timarlop]

I've been looking to buy some tips for my Daxis "Hakko 939" clone soldering station for ages!
I'm stuck with the default tip that came with it: a conical Gordak 900M-T-I

Local stores here sell Hakko 900M tips for 10 to 13 euros!
Ended up buying a crap 1.6D tip from ebay some years ago that did nothing.

PCBONEZ posted here about Hakko parts from this seller Cantonmade.

Are these $1.95 Cantonmade tips reasonable good ?

[timarlop]

Re: Hakko 900M soldering tips from Cantonmade, are they good?

Forget about Cantonmade, seems that PayPal restricted their account.

[rtra]

Re: Hakko 900M soldering tips from Cantonmade, are they good?

Hi, What you end up buying ? And the end result?
I have a daxis station too, but I have no idea what tip, heater, iron to buy.
Thank's

[stj]

Re: Hakko 900M soldering tips from Cantonmade, are they good?

buy this.
http://www.banggood.com/BAKON-950D-7...-p-982824.html

and this:
http://www.banggood.com/T12-Series-S...-p-932701.html

and this:
http://www.banggood.com/T12-ILS-Repl...p-1064393.html

and you will have everything

[rtra]

Re: Hakko 900M soldering tips from Cantonmade, are they good?

Very interesting alternative :O
How good are these tips compared with genuine hakko? Have you tried it yourself?

[stj]

Re: Hakko 900M soldering tips from Cantonmade, are they good?

not yet, but ordered.
others have said they are 100% good though.

watch this to see how fast they can heat!!
https://www.youtube.com/watch?v=u588...ature=youtu.be

[timarlop]

Re: Hakko 900M soldering tips from Cantonmade, are they good?

Hi, What you end up buying ? And the end result?
I have a daxis station too, but I have no idea what tip, heater, iron to buy.
Thank's

Olá

What is your daxis model / ref ?

For 936 clone type stations I recommend, for all-round work, the 900-M series: Shape D or C , 2~2.4 sizes

I would prefer the 9000M-T-2.4D, but you can't always get what you want, so I'm using this BEST 900M-T-2C from ebay and it's a good tip for the price, you can see it in the photos

When buying look for a brand, see the description tip weight, a junk tip weights less.

If you don't know which tip shape to choose see Hakko tip selecting.

[rtra]

Re: Hakko 900M soldering tips from Cantonmade, are they good?

Olá

What is your daxis model / ref ?

For 936 clone type stations I recommend, for all-round work, the 900-M series: Shape D or C , 2~2.4 sizes

I would prefer the 9000M-T-2.4D, but you can't always get what you want, so I'm using this BEST 900M-T-2C from ebay and it's a good tip for the price, you can see it in the photos

When buying look for a brand, see the description tip weight, a junk tip weights less.

If you don't know which tip shape to choose see Hakko tip selecting.

Olá
I have a Daxis TO0603 like this one .
I think the tip you use will work awesome.
But I need also to replace the handle or at least my heater element(broken), and my doubt is what element to pick because apparently there are differences using a heater a1321 or a1322.
As i read somewhere i should use the appropriate one due the electrical diferences...
What is your advice pick one and hope for the best ? xD

[timarlop]

Re: Hakko 900M soldering tips from Cantonmade, are they good?

You should use the appropriate one, they have different resistances and use different methods to sense the temperature.

Know more reading Hakko 936 ceramic heater A1321 vs fake comparison

You could try to identify yours by measuring resistances values, see this instructions: