Hi Folks,
This might be a board replacement project, but wondering if other have had experience with this.
Picked up a Samsung 40D630 TV, no power. No Standby or other voltages on the PS board. The large caps are not reading any DC, and AC is showing 1.5 V
I found FM801S (cold side) fuse to be open. I replaced it, but no improvement, and the new Fuse is not blowing up.
PS board replacement, or is it worth troubleshooting the board (ideally, I'd love to, but I never had one with no voltage on the large caps before)
Thank you
This might be a board replacement project, but wondering if other have had experience with this.
Picked up a Samsung 40D630 TV, no power. No Standby or other voltages on the PS board. The large caps are not reading any DC, and AC is showing 1.5 V
I found FM801S (cold side) fuse to be open. I replaced it, but no improvement, and the new Fuse is not blowing up.
PS board replacement, or is it worth troubleshooting the board (ideally, I'd love to, but I never had one with no voltage on the large caps before)
Thank you
Comment