Hi all.
I have particular problem with my PC monitor Samsung PX2370. I have two computers connected to the monitor.
Firs connected on DVI cable and second on HDMI. On both PC are set same resolution 1920x1080.
Sometime when i want to switch monitor to the PC connected on HDMI i click source button on back side of the monitor.
Source mode is set to auto. But after auto start connected source does not find the HDMI device and returns to the device connected to the DVI.
When I turn on only the PC connected to the HDMI monitor will start to search for the connected device when turned on. They thought nothing was attached and switched to standby mode.
The only solution to solve this problem is unplug DC power from monitor and wait 10 sec. The monitor then finds the device connected via HDMI.
But open windows and tabs is resized and shifted o the corner of the desktop. In the notification bar is a report of the recommended resolution.
Video link: https://www.youtube.com/watch?v=CUSUZW_0SUQ
I have particular problem with my PC monitor Samsung PX2370. I have two computers connected to the monitor.
Firs connected on DVI cable and second on HDMI. On both PC are set same resolution 1920x1080.
Sometime when i want to switch monitor to the PC connected on HDMI i click source button on back side of the monitor.
Source mode is set to auto. But after auto start connected source does not find the HDMI device and returns to the device connected to the DVI.
When I turn on only the PC connected to the HDMI monitor will start to search for the connected device when turned on. They thought nothing was attached and switched to standby mode.
The only solution to solve this problem is unplug DC power from monitor and wait 10 sec. The monitor then finds the device connected via HDMI.
But open windows and tabs is resized and shifted o the corner of the desktop. In the notification bar is a report of the recommended resolution.
Video link: https://www.youtube.com/watch?v=CUSUZW_0SUQ