thanks again for the response jarotech the pin 1 of both 1st and 2nd chip connected to the ground of the switch i have upload the image i put arrow on the connected of pin1 of the chip
this is weird on the other side of the switch is not connected to any of the chip or to any resistor and capcitor downside of the switch board.i have upload image of the backside of the power switch board
The switch is directly connected to pin 4 (ON / OFFBTN #) of the ribbon, so if you have nothing on the switch, the trace is open somewhere on the board. I just found the schematic of that board.
Comment