Badcaps.net Forum
Go Back   Badcaps Forums > Motherboards with Bad Capacitors > Abit - Asus - Aopen
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 05-10-2012, 05:45 AM   #1
TheSolarShed
New Member
 
Join Date: Apr 2012
City & State: Cape Town
My Country: South Africa
I'm a: Knowledge Seeker
Posts: 18
Default Abit BP6 Leaking and Bulging Caps

One or more of the labs at my university threw out discontinued equipment, and amongst the pile was this Abit BP6. Got it home and spotted the problem caps straight away.


I started to desolder some of these pathetic Tayeh caps and this is what the worst one looks like underneath. The rest are just bulging slightly.


I've read the Abit BP6 recapping thread posted by Topcat and want to replace the caps with these modded values. What rated rippled current and ESR value must I look for? Or will any good-quality low ESR cap with specified capacitance and voltage be fine?

I've only looked at Rubycon from one local source so far and this is what I've found for 2200F (both 10mm):
-ZLH series, 6.3v, 1960mA ripple, 0.020Ω ESR
-ZL series, 6.3v, 2150mA ripple, 0.022Ω ESR

My first multi-processor computer, and it came from the dumpster . I hope it works after the recapping.

Regards,
TheSolarShed
TheSolarShed is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 06:59 PM.
Did you find this forum helpful?