Insignia 24” ns-24e340a13 LED HDTV

[DarrenB123]

My Insignia TV is showing a horizontal bar stretching across the middle of the screen from left to right. The bar is not completely black and is still showing some light. I found it weird because the bar covered 1/3 of the screen, just the middle. Does someone know what happened and how to fix it?

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

What is the history of the TV?

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

The TV was used when I bought it and it would have a problem which when I would turn it on at the start of the day it would show a ring near the border of the TV. I would push the screen gently and it would fix itself. The same problem happened again so I pushed the screen but that part in the middle stayed. The whole screen used to have that in the picture but the middle part stayed

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

Did you open it up and re-seat the cables?

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

No I did not. I was pressing on the screen and then that happened. I opened the back of the TV to see what was wrong and I touched a few wires and that's all.

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

You can try re-seating the LVDS cable.
Show us the pictures of the backside of the units so we can see all the boards.

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

How do I re-seat the lvds cables

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

You picture does not show the whole back of the unit, I cannot see the LCD panel LVDS connector.

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

Here I'm sorry

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

You just squeeze the left and right sides to release the lock.

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

On which cable? And what do I do after

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

The connector on the LCD panel, just remove and reinsert back in place (re-seating).
No power to the unit!

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

That sadly did not work

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

What else could I try?

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

At this point you have panel problem.

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

so what do I replace?

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

The panel.

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

so my t-con board?

[budm]

Re: Insignia 24” ns-24e340a13 LED HDTV

You panel has integrated T-CON. the horizon bad is due to Gate drive issue.

[DarrenB123]

Re: Insignia 24” ns-24e340a13 LED HDTV

Where can I find a compatible lcd panel