![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Feb 2011
Posts: 155
|
![]() I don't have this off the wall yet but it my mothers tv. We have tried different cables and receiver, so it has to be the tv. Could it be speakers or probably main board. Where do I start? Voltages? Thanks
|
![]() |
![]() |
![]() |
#2 |
Badcaps Veteran
Join Date: Feb 2014
City & State: Midlands
My Country: England
I'm a: Professional Tech
Posts: 6,036
|
![]() Plug in headphones, is it still distorted?
|
![]() |
![]() |
![]() |
#3 |
Badcaps Veteran
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 8,101
|
![]() Try unpluging the tv for 10~15 min. and see if that helps, if not check the firmware version, I see there is a firmware update for the 6000 series, (2.1.0.12031_10). If that does'nt help you might try the service menu route and try a factory reset.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Feb 2011
Posts: 155
|
![]() Well my mother went ahead and bought a new one so since my bedroom tv quit it went straight on my wall. I am running it through my receiver so wasn’t worried about the sound but I have noticed some screen lagging. Not sure if that’s the right term So I am guessing when that happens that’s when the sound messes up which she probably didn’t notice. It’s still on the wall so I haven’t done any testing at all, but I was just thinking I would order a main board for it. If you had to throw a board at it would that be your choice?
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Feb 2011
Posts: 155
|
![]() Sorry meant to add I did do a firmware update, no help.
|
![]() |
![]() |
![]() |
#6 |
Badcaps Veteran
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 39,206
|
![]() Sound like Lip-sync issue, not sure if this model has adjustable timing for Lip-sync or not.
__________________
Never stop learning Basic LCD TV and Monitor troubleshooting guides. http://www.badcaps.net/forum/showthr...956#post305956 Voltage Regulator (LDO) testing: http://www.badcaps.net/forum/showthr...999#post300999 Inverter testing using old CFL: http://www.badcaps.net/forum/showthr...er+testing+cfl Tear down pictures : Hit the ">" Show Albums and stories" on the left side http://s807.photobucket.com/user/budm/library/ TV Factory reset codes listing: http://www.badcaps.net/forum/showthread.php?t=24809 |
![]() |
![]() |
![]() |
#7 |
Badcaps Veteran
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 8,101
|
![]() To the OP.
The SPDIF output has Audio delay of (0ms ~ 250ms) on this model, as stated in the owners manual Last edited by R_J; 03-22-2020 at 12:02 PM.. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|