Re: 2015 Insignia NS-55D421NA16 No Standby-PSU Sparks
Pad 1 goes to a >1 ohm resistor below and to the left.
Pad 2 goes to the left side of the resistor under and to the right of pad 3. It measures 5.45K.
Pad 3 goes to a common point between the two resistors under and to the Right of pad 3. Both resistors measure approx. 5.45K.
Pin 4 has a bad trace.
Pin 5 goes back to the 12V supply.
Pin 6, the upper left pad opposite the arrow goes to the 4R7 inductor above it.
Pad 1 goes to a >1 ohm resistor below and to the left.
Pad 2 goes to the left side of the resistor under and to the right of pad 3. It measures 5.45K.
Pad 3 goes to a common point between the two resistors under and to the Right of pad 3. Both resistors measure approx. 5.45K.
Pin 4 has a bad trace.
Pin 5 goes back to the 12V supply.
Pin 6, the upper left pad opposite the arrow goes to the 4R7 inductor above it.
Comment