Badcaps.net Forum
Go Back   Badcaps Forums > Motherboards with Bad Capacitors > Other Devices with Bad Capacitors
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 12-16-2014, 08:23 AM   #161
pbrabner
New Member
 
Join Date: Dec 2014
City & State: Hoover, AL
My Country: USA
I'm a: Knowledge Seeker
Posts: 6
Default Re: Dim Clock LCD on Jenn-Air wall oven

Here is a photo of my display board. Model# JJW9530DDS. Which caps do I replace?
Attached Images
File Type: jpg IMG_20141216_084705_935.jpg (608.4 KB, 80 views)
pbrabner is offline   Reply With Quote
Old 12-16-2014, 09:36 AM   #162
goontron
5000!
 
goontron's Avatar
 
Join Date: Dec 2011
City & State: South Greeley, Wyoming
My Country: US
Line Voltage: 13.9kv HT service and some 240v center tap oddity.
I'm a: Professional Tech
Posts: 3,972
Default Re: Dim Clock LCD on Jenn-Air wall oven

Quote:
Originally Posted by pbrabner View Post
Here is a photo of my display board. Model# JJW9530DDS. Which caps do I replace?
All.
__________________
Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

Excuse me while i do something dangerous


You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
goontron is offline   Reply With Quote
Old 12-16-2014, 01:27 PM   #163
pbrabner
New Member
 
Join Date: Dec 2014
City & State: Hoover, AL
My Country: USA
I'm a: Knowledge Seeker
Posts: 6
Default Re: Dim Clock LCD on Jenn-Air wall oven

I got the all part. What did the other comment mean?
pbrabner is offline   Reply With Quote
Old 12-16-2014, 01:36 PM   #164
goontron
5000!
 
goontron's Avatar
 
Join Date: Dec 2011
City & State: South Greeley, Wyoming
My Country: US
Line Voltage: 13.9kv HT service and some 240v center tap oddity.
I'm a: Professional Tech
Posts: 3,972
Default Re: Dim Clock LCD on Jenn-Air wall oven

both of these. if not the display itself could be bad.
Attached Images
File Type: jpg IMG_20141216_084705_935.jpg (979.5 KB, 54 views)
goontron is offline   Reply With Quote
Old 12-16-2014, 07:57 PM   #165
pbrabner
New Member
 
Join Date: Dec 2014
City & State: Hoover, AL
My Country: USA
I'm a: Knowledge Seeker
Posts: 6
Default Re: Dim Clock LCD on Jenn-Air wall oven

Now when I push Bake I am getting a message that says "Feature Not Available" I looked that up and it says that there is a fault that is keeping the cantroller from working. Any suggestions?
pbrabner is offline   Reply With Quote
Old 12-16-2014, 08:09 PM   #166
goontron
5000!
 
goontron's Avatar
 
Join Date: Dec 2011
City & State: South Greeley, Wyoming
My Country: US
Line Voltage: 13.9kv HT service and some 240v center tap oddity.
I'm a: Professional Tech
Posts: 3,972
Default Re: Dim Clock LCD on Jenn-Air wall oven

Quote:
Originally Posted by pbrabner View Post
Now when I push Bake I am getting a message that says "Feature Not Available" I looked that up and it says that there is a fault that is keeping the cantroller from working. Any suggestions?
let me lookup thee reset procedure for the model.
goontron is offline   Reply With Quote
Old 12-16-2014, 08:45 PM   #167
goontron
5000!
 
goontron's Avatar
 
Join Date: Dec 2011
City & State: South Greeley, Wyoming
My Country: US
Line Voltage: 13.9kv HT service and some 240v center tap oddity.
I'm a: Professional Tech
Posts: 3,972
Default Re: Dim Clock LCD on Jenn-Air wall oven

Press and hold the BACK and ENTER pads simultaneously for five seconds.
goontron is offline   Reply With Quote
Old 12-17-2014, 07:38 AM   #168
pbrabner
New Member
 
Join Date: Dec 2014
City & State: Hoover, AL
My Country: USA
I'm a: Knowledge Seeker
Posts: 6
Default Re: Dim Clock LCD on Jenn-Air wall oven

All that did was lock and unlock the door. When the "feature not available" message shows up there are two timers and timer #2 shows "1c2c" when the above message shows up.
pbrabner is offline   Reply With Quote
Old 12-17-2014, 07:40 AM   #169
pbrabner
New Member
 
Join Date: Dec 2014
City & State: Hoover, AL
My Country: USA
I'm a: Knowledge Seeker
Posts: 6
Default Re: Dim Clock LCD on Jenn-Air wall oven

Also I when I had the panel off I touched the top end of two of the caps and they shocked me. That is not normal is it?
pbrabner is offline   Reply With Quote
Old 12-17-2014, 09:15 AM   #170
goontron
5000!
 
goontron's Avatar
 
Join Date: Dec 2011
City & State: South Greeley, Wyoming
My Country: US
Line Voltage: 13.9kv HT service and some 240v center tap oddity.
I'm a: Professional Tech
Posts: 3,972
Default Re: Dim Clock LCD on Jenn-Air wall oven

Quote:
Originally Posted by pbrabner View Post
Also I when I had the panel off I touched the top end of two of the caps and they shocked me. That is not normal is it?
IIRC they are not isolated, so yes.
goontron is offline   Reply With Quote
Old 12-17-2014, 09:19 AM   #171
goontron
5000!
 
goontron's Avatar
 
Join Date: Dec 2011
City & State: South Greeley, Wyoming
My Country: US
Line Voltage: 13.9kv HT service and some 240v center tap oddity.
I'm a: Professional Tech
Posts: 3,972
Default Re: Dim Clock LCD on Jenn-Air wall oven

Quote:
Originally Posted by pbrabner View Post
All that did was lock and unlock the door. When the "feature not available" message shows up there are two timers and timer #2 shows "1c2c" when the above message shows up.
1c2c is a touchpad error... Strange. Can I get a pic of the front and back of the touchpad.

Last edited by goontron; 12-17-2014 at 09:22 AM..
goontron is offline   Reply With Quote
Old 12-30-2014, 03:38 PM   #172
large9
New Member
 
Join Date: Dec 2014
City & State: Santa Maria Ca.
My Country: USA
I'm a: Knowledge Seeker
Posts: 2
Default Re: Dim Clock LCD on Jenn-Air wall oven

My board just went out for the fourth time and the last board I put in has the resistor in series with the C3. I have three replaced bad boards plus a bad board in the stove and I ordered parts to cover all four boards. No one has mentioned a desolder pump so I guess I won't need one. I am repairing a 71003424 board.
large9 is offline   Reply With Quote
Old 01-04-2015, 08:55 AM   #173
large9
New Member
 
Join Date: Dec 2014
City & State: Santa Maria Ca.
My Country: USA
I'm a: Knowledge Seeker
Posts: 2
Default Re: Dim Clock LCD on Jenn-Air wall oven

I ordered the parts for all the boards and now have the stove display is back. Two bad caps on the one board and resistors were used on two of the c3 slots for the other boards. I was surprised to see this but at least I will have a spare when the present board fails again.
large9 is offline   Reply With Quote
Old 01-20-2015, 07:41 AM   #174
mbutle1
New Member
 
Join Date: Jan 2015
City & State: Shawnee, KS
My Country: USA
I'm a: Knowledge Seeker
Posts: 1
Default Re: Dim Clock LCD on Jenn-Air wall oven

All I can say is Thanks bluto and the members on this forum! I became a member just because of this topic. My Jenn-Aire oven's display over the last few weeks began dimming. I found this thread through a Google search. Read through it with great interest. This was my exact issue! I ordered the recommended parts from Digi-Key. After taking the oven face off. I replaced all the caps on the board. I have never replaced caps, ever. I was pretty confident after reading this post and watching several youtube videos about the subject. After putting my oven back together and turning the power back on to it. The display worked like brand new. The cost was under $10 and the time was one morning. Thank you for everything here!
mbutle1 is offline   Reply With Quote
Old 03-28-2015, 01:20 PM   #175
khs
New Member
 
Join Date: Mar 2015
City & State: Mansfield, Ontario
My Country: Canada
I'm a: Knowledge Seeker
Posts: 1
Default Re: Dim Clock LCD on Jenn-Air wall oven

Thanks .... just repaired my Jenn-Air SVE47600WC using the info in this forum. I had plenty of experience with soldering components so it was a breeze. My solder sucker makes removal simple. Those without experience should keep in mind not to use too much heat as it will damage the traces on the board.
khs is offline   Reply With Quote
Old 09-12-2015, 05:49 PM   #176
Remidetroit
New Member
 
Join Date: Sep 2015
City & State: Virginia
My Country: USA
I'm a: Knowledge Seeker
Posts: 1
Default Re: Dim Clock LCD on Jenn-Air wall oven

Jenn-Air JDS9865BDP Range
Display became very dim about one week ago. Itís very dim as you must have lights out or hand over display to tell it even works. Reading forums I learned that C3 capacitor is likely the cause but my model is newer different. I planned to replace the capacitor anyway but was unable to find a 57u rated 250V locally. I went to a TV repair store to see if they stocked them and they put a quick tester on them (while still on circuit board) and they said ďthatís not the problemĒÖ. I had him put the same tester on C3, C6 and C7 which all tested good for what thatís worth. So now I donít know if itís a waste of time to still replace them or if this is a different problem. Advice?
Attached Images
File Type: jpg IMG_8070.jpg (789.9 KB, 37 views)
File Type: jpg IMG_8091.jpg (874.6 KB, 29 views)
File Type: jpg IMG_8094.jpg (673.4 KB, 24 views)
Remidetroit is offline   Reply With Quote
Old 09-12-2015, 06:42 PM   #177
goontron
5000!
 
goontron's Avatar
 
Join Date: Dec 2011
City & State: South Greeley, Wyoming
My Country: US
Line Voltage: 13.9kv HT service and some 240v center tap oddity.
I'm a: Professional Tech
Posts: 3,972
Default Re: Dim Clock LCD on Jenn-Air wall oven

Quote:
Originally Posted by Remidetroit View Post
Jenn-Air JDS9865BDP Range
Display became very dim about one week ago. Itís very dim as you must have lights out or hand over display to tell it even works. Reading forums I learned that C3 capacitor is likely the cause but my model is newer different. I planned to replace the capacitor anyway but was unable to find a 57u rated 250V locally. I went to a TV repair store to see if they stocked them and they put a quick tester on them (while still on circuit board) and they said ďthatís not the problemĒÖ. I had him put the same tester on C3, C6 and C7 which all tested good for what thatís worth. So now I donít know if itís a waste of time to still replace them or if this is a different problem. Advice?
did they test them with the board physically hot? if not, replace them. it could show up when the board warms.
goontron is offline   Reply With Quote
Old 09-14-2015, 06:06 PM   #178
fzabkar
Badcaps Veteran
 
Join Date: Mar 2009
My Country: Australia
Line Voltage: 230VAC 50Hz
Posts: 773
Default Re: Dim Clock LCD on Jenn-Air wall oven

Check the capacitor on pins 2 and 3 of ST7.
fzabkar is offline   Reply With Quote
Old 09-14-2015, 09:18 PM   #179
clearchris
Badcaps Veteran
 
clearchris's Avatar
 
Join Date: Dec 2013
City & State: San Antonio
My Country: United States
Line Voltage: 120v 60hz / 240v 60hz
I'm a: Hardcore Geek
Posts: 227
Default Re: Dim Clock LCD on Jenn-Air wall oven

If the board is anywhere near heat, just replace all the caps. If they arent cooked yet, they will be soon. Caps are cheap.

I did this for my oven this year. Oven was only a few years old too.
clearchris is offline   Reply With Quote
Old 09-17-2015, 06:15 PM   #180
weisj
New Member
 
Join Date: Sep 2015
City & State: mass
My Country: usa
I'm a: Knowledge Seeker
Posts: 1
Default Re: Dim Clock LCD on Jenn-Air wall oven

Just wanted to say thanks to Bluto and this site! Just successfully replaced the bad capacitor for my dimmed out oven clock. I have never soldered anything in my life or, sorry to say, even knew what a capacitor was but dammed if I was going to buy a new board without trying. Read the post, watched the video, bought all the equipment and voila!
Aint the internet great....
weisj is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums © 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 04:48 PM.
Did you find this forum helpful?