Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Computer Displays
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 10-23-2009, 01:55 PM   #21
Davi.p
Badcaps Veteran
 
Join Date: Sep 2009
City & State: Milan
My Country: Italy
Line Voltage: 230Vac 50Hz
I'm a: Hobbyist Tech
Posts: 1,353
Default Re: Benq Q7T4 FP71G

Canadan: get a piece of metal wire (copper wire 4 exmpl) thin the point (tip) and wrap around the the iron tip leaving one lead over the iron tip, use this thin "second" tip to solder the tiny fuse, to desolder it use the cutter gently..
Davi.p is offline   Reply With Quote
Old 02-15-2011, 12:10 PM   #22
Vivio
New Member
 
Join Date: Feb 2011
Posts: 6
Default Re: Benq Q7T4 FP71G

Sorry for reviving the thread, but I have a problem with this monitor also.

In the inverter zone I had the electrolytic capacitors with the electrolyte liquid leaked. So I've replaced them all.

Beside that I have replaced the two MOSFET and the all 4 2SC5707.
Since I did not had 220nF/160V i have used some old ones. The picofuse was replaced with a normal one rated 3,15V/250V.

After several days the monitor is having the same defect: nu illumination.

From what I read here I'll do the following:
1. replace again the MOSFET and 2SC5707
2. put new 220nF/160V
3. solder all the connections in the inverter area
4. replace again the picofuse with a 3,15A one

Do you think I do the right thing?
Vivio is offline   Reply With Quote
Old 02-15-2011, 12:15 PM   #23
retiredcaps
Badcaps Veteran
 
Join Date: Apr 2010
City & State: Canada
Posts: 9,079
Default Re: Benq Q7T4 FP71G

You must resolder all the inverter transformer pins otherwise the picofuse is likely to blow again.
__________________
--- begin sig file ---

If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

Please do not post inline and offsite as they slow down the loading of pages.

--- end sig file ---
retiredcaps is offline   Reply With Quote
Old 02-15-2011, 01:19 PM   #24
EGuevarae
Badcaps Veteran
 
EGuevarae's Avatar
 
Join Date: Nov 2008
City & State: Chiriaco Summit, CA - near the AZ-CA Border
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 1,308
Default Re: Benq Q7T4 FP71G

Quote:
Originally Posted by retiredcaps View Post
You must resolder all the inverter transformer pins otherwise the picofuse is likely to blow again.
And the 07's will go too.Resolder All areas that you see odd/strange.
Post pics. And what about the other caps?
__________________
There are 10 kind of people in this world: those that understand binary, and those who don't.
  • ASUS ROG Maximus IX Code
  • Intel Core i5-7600K 3.8GHz
  • 16gb GSKILL TridentZ RGB DDR4-3200
  • 1 M2 SSD + 2 WD Blue 1TB (Mirrored)
  • Windows 10 Pro x64
  • GeForce GT1050
    2 x Acer KA240H + 1 Vewsonic VP2130 21 (a cap replacement job )
EGuevarae is offline   Reply With Quote
Old 02-15-2011, 01:56 PM   #25
Vivio
New Member
 
Join Date: Feb 2011
Posts: 6
Default Re: Benq Q7T4 FP71G

retiredcaps thank you!

EGuevarae
to be sure the 2 MOSFET and the 4 2SC5707 will be replaced, along with the capacitors between them: 220nF/160V.


The picture is from the first repair right after the monitor was opened and the quality is not that great. Sorry for that.

In the pic is shown with RED: all the components that have been already replaced the first time and I will not be replace them now. Exception is the 220nF/160V.

With BLUE: the components that I intend to replace. The first time I have not replaced C811, but I will do it now just to be sure.

That picofuse give me nightmares, is such a problem if I put a normal fuse in there?

My girl was very happy when I had repaired her monitor the first time. Hope I'll do it again A late valentine present

Thanks for your advices!
Attached Images
File Type: jpg benq.jpg (417.4 KB, 84 views)
Vivio is offline   Reply With Quote
Old 02-15-2011, 02:19 PM   #26
retiredcaps
Badcaps Veteran
 
Join Date: Apr 2010
City & State: Canada
Posts: 9,079
Default Re: Benq Q7T4 FP71G

On ebay, you can buy "c5707 kit" which will have the c5707s, fu9024 fets, and a picofuse. Price is around $4 USD.

Unless the grey cap is visibly bad, you don't have to replace it. We don't hear much about those caps going bad although it is possible. At minimum, add some fresh solder to the cap legs.
retiredcaps is offline   Reply With Quote
Old 02-15-2011, 02:43 PM   #27
Vivio
New Member
 
Join Date: Feb 2011
Posts: 6
Default Re: Benq Q7T4 FP71G

One of those gray caps had some problems. At first repair I had put some old caps from a cannibalized TV Now I'll buy new ones to be sure.

At the same price I can buy the c5707s, fu9024 here in Romania from a store directly without waiting for the package and paying the shipment more then the parts itself. The problem is to find a proper replacement for the picofuse. That makes me mad

Thanks for your input!
Vivio is offline   Reply With Quote
Old 03-29-2011, 07:25 AM   #28
Vivio
New Member
 
Join Date: Feb 2011
Posts: 6
Default Re: Benq Q7T4 FP71G

Update:

I have replaced the 2 MOSFET and the 4 2SC5707, along with the capacitors between them: 220nF/160V.

The picofuse has been replaced with an part that is almost similar FSK03.15

Also, I have soldered the whole inverter area. For two weeks the monitor works well, hope it will last forever
Vivio is offline   Reply With Quote
Old 10-27-2011, 12:05 PM   #29
killian6pk
Badcaps Veteran
 
killian6pk's Avatar
 
Join Date: Apr 2010
City & State: Kentucky
My Country: USA
Line Voltage: 120VAC 60HZ
I'm a: Knowledge Seeker
Posts: 484
Default Re: Benq Q7T4 FP71G

Were you able to get the bezel and back plastic case completely apart. The one I am working on does not want to come apart in the center of the button bar. There seems to be an injection molded connection between the top and bottom plastic. If you have some idea how these two pieces come apart, I would appreciate it if you could let me know.
killian6pk is offline   Reply With Quote
Old 10-27-2011, 01:41 PM   #30
Vivio
New Member
 
Join Date: Feb 2011
Posts: 6
Default Re: Benq Q7T4 FP71G

well, not my best work...
At the button level I have squizzed a small screwdriver and little by little the lid was freed.

There are few marks, maybe look for another advise also
Vivio is offline   Reply With Quote
Old 10-27-2011, 02:38 PM   #31
killian6pk
Badcaps Veteran
 
killian6pk's Avatar
 
Join Date: Apr 2010
City & State: Kentucky
My Country: USA
Line Voltage: 120VAC 60HZ
I'm a: Knowledge Seeker
Posts: 484
Default Re: Benq Q7T4 FP71G

Thanks, I found out it is under the part of the stand that stays attached to the monitor. You have to take two screws out of that stand part and slide that part out of the back of the monitor and then there is a small screw that you can get out and the two halves of the plastic case come apart.
killian6pk is offline   Reply With Quote
Old 10-28-2011, 02:21 AM   #32
Vivio
New Member
 
Join Date: Feb 2011
Posts: 6
Default Re: Benq Q7T4 FP71G

Sorry I thought you have taken out the screws. My problem was to detach the silver cover
Vivio is offline   Reply With Quote
Old 10-28-2011, 11:14 AM   #33
killian6pk
Badcaps Veteran
 
killian6pk's Avatar
 
Join Date: Apr 2010
City & State: Kentucky
My Country: USA
Line Voltage: 120VAC 60HZ
I'm a: Knowledge Seeker
Posts: 484
Default Re: Benq Q7T4 FP71G

You have to take off the two stand offs that the VGA Plug Screws into. Then that cover will slide off. I bent mine a little also until I realized those two were actually through the silver cover also.
killian6pk is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 04:00 PM.
Did you find this forum helpful?