Do you think there would be an issue if I removed a non-touch screen LCD (now broken) and installed a touch LCD? These screens are from similar Asus X541UA models, just the non-touch is from a generation earlier. They both have 40 pin connects to the motherboard. I don't want to damage anything, and am not concerned if the touch function is lost.
Also, if someone has the BV for the X541UV rev 2.0, then I could compare signals to the BV which has the touch screen, and I already have (X541UVK rev 2.0). There doesn't seem to be many differences when visually looking at the two boards.
Also, if someone has the BV for the X541UV rev 2.0, then I could compare signals to the BV which has the touch screen, and I already have (X541UVK rev 2.0). There doesn't seem to be many differences when visually looking at the two boards.
Comment