I noticed lately that my Viewsonic VA903MB monitor had some issues, flashing black screen rapidly and 2 or 3 inch wide green bar going up and down vertical. Flashed so quickly I could barely see boot screen etc, so I took it apart and noticed a couple blown /bad capacitors.
I took them both out, but stupid me forgot to write down the pin numbers for each one. I already ordered two 10 pieces of both sizes on ebay...
Elite 1000 uF 16V
Elite 680 uF 25V
I managed to find two pictures online that resemble the exact circuit board I'm needing answers to. I just need to confirm the right capacitors for the right pins.
Pin #C923
Pin #C926
In the two pictures I have, I put a red border box around them. And from the one picture off of ebay I noticed the "far right" one has 1000 uF on top of capacitor casing. Does anyone here know for sure or that I'm correct?
Pin #C923 gets the 680 uF 25V and Pin #C926 gets the 1000 uF 16V capacitor...? From now on I'll make sure to write down pin numbers and which capacitor size goes with which. Lol!
I took them both out, but stupid me forgot to write down the pin numbers for each one. I already ordered two 10 pieces of both sizes on ebay...
Elite 1000 uF 16V
Elite 680 uF 25V
I managed to find two pictures online that resemble the exact circuit board I'm needing answers to. I just need to confirm the right capacitors for the right pins.
Pin #C923
Pin #C926
In the two pictures I have, I put a red border box around them. And from the one picture off of ebay I noticed the "far right" one has 1000 uF on top of capacitor casing. Does anyone here know for sure or that I'm correct?
Pin #C923 gets the 680 uF 25V and Pin #C926 gets the 1000 uF 16V capacitor...? From now on I'll make sure to write down pin numbers and which capacitor size goes with which. Lol!
Comment