Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Intel D101ggc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Intel D101ggc

    1 820MF 6.3V was leaking. Replaced, the new replacement was leaking within a few min as well, after I replaced the Power supply. (we are in the comp business so we have them laying around). NO other capacitors look bad. The computer started to give us trouble a while ago.

    What can cause it to keep screwing the capacitors. Its not overclocked and all the fans are working. These intel Boards run the CPU hot. (55C) I verified with intel specs its correct.

    any suggestions besides scraping it?

    Moe.

    #2
    Re: Intel D101ggc

    got a foto showing where the cap is?
    and what type are you using?

    Comment


      #3
      Re: Intel D101ggc

      The capacitor is right next to the edge by the pci slot.
      The replacemet was purchesed from badcaps. (these people) I even got the better capacitors....

      Thanks,

      Moe.

      (if you still need a picture, I will be at the office later today)

      Comment


        #4
        Re: Intel D101ggc

        Some boards have silkscreening done the opposite way (white stripe is actually +voltage instead of ground). Check the polarity with a multimeter.

        Comment


          #5
          Re: Intel D101ggc

          Sure enough, the voltage is backward vs the silkscreen. I will replace the cap with a new one and see how its working.

          Thanks.

          Moe.

          Comment

          Working...
          X