Further to thread
https://www.badcaps.net/forum/showth...dimension+3000
I have got round to recapping these with polys
Q - there are two caps which are not polarised
these are Chemicon SME BP 220uF 6.3V 5 deg C
My belief is these are used for audio on the mobo.
The ESR measures about 0.67Z on each cap.
Whereas, my ESR meter puts 100kHz across the cap to measure ESR,
being these are for audio (so I believe), they will be used for audio b/w.
I want to replace these with Chemicon LXY 220uF 25V principally
because they fit ok. Of course, these are polarised.
Will I have any problems?
Thanks
https://www.badcaps.net/forum/showth...dimension+3000
I have got round to recapping these with polys
Q - there are two caps which are not polarised
these are Chemicon SME BP 220uF 6.3V 5 deg C
My belief is these are used for audio on the mobo.
The ESR measures about 0.67Z on each cap.
Whereas, my ESR meter puts 100kHz across the cap to measure ESR,
being these are for audio (so I believe), they will be used for audio b/w.
I want to replace these with Chemicon LXY 220uF 25V principally
because they fit ok. Of course, these are polarised.
Will I have any problems?
Thanks
Comment