Hello everyone,
I so much enjoyed my last post that I bought this non working Benq G2255 monitor that when plugged in the power light lights up as amber and no matter what I press, I get no response.
Included are photos of the boards.
I checked the voltage on the big cap 164V, and I get 3.3V and 5.2 V on the connector from the power board to the control board.
Power supply looks good, the caps look OK although not the best brand (Elite), so I am eager to have your thoughts on what I should look at next.
Many thanks to all of you!
I so much enjoyed my last post that I bought this non working Benq G2255 monitor that when plugged in the power light lights up as amber and no matter what I press, I get no response.
Included are photos of the boards.
I checked the voltage on the big cap 164V, and I get 3.3V and 5.2 V on the connector from the power board to the control board.
Power supply looks good, the caps look OK although not the best brand (Elite), so I am eager to have your thoughts on what I should look at next.
Many thanks to all of you!
Comment