Re: Samsung 910t
I've removed the two transformers from the inverter board and measured the resistance of the primary and secondary side.
1. Transformer:
primary: 0.3 ohm
secondary: 1077 ohm
2. Transformer:
primary: 0.3 ohm
secondary: 996 ohm
Transformers are identical type and part number.
In my opinion, the difference is quite big. Do you think there is a short between windings in the second transformer, or ist this still an acceptable tolerance?
Does this justify ordering a new transformer? Probably a problem to get the original transformer here in Germany.
Originally posted by PlainBill
View Post
1. Transformer:
primary: 0.3 ohm
secondary: 1077 ohm
2. Transformer:
primary: 0.3 ohm
secondary: 996 ohm
Transformers are identical type and part number.
In my opinion, the difference is quite big. Do you think there is a short between windings in the second transformer, or ist this still an acceptable tolerance?
Does this justify ordering a new transformer? Probably a problem to get the original transformer here in Germany.
Comment