As I wrote in the other thread, all two G73SW 3D boad that I have, not detect this 50-pin LCD (I have two of this and one is new). This boards have two internal LCD connectors, one of them is for 50-pin 3D screen. the system can not switch to the correct connector.
I would be sure That These settings are correct for the type of display or
to force the BIOS to recognize it .
Default option for LCD is VBIOS but I do not know if it refer to VBIOS in main bios or on MXM card
thanks
I would be sure That These settings are correct for the type of display or
to force the BIOS to recognize it .
Default option for LCD is VBIOS but I do not know if it refer to VBIOS in main bios or on MXM card
thanks